nathanway Member 106 Member For: 13y 3m 23d Gender: Male Location: townsville Posted 11/08/13 06:04 AM Share Posted 11/08/13 06:04 AM hello all as my thread says my tax money is coming, also ive saved up my money too got 2600 to go on top of my tax money so all together ill have about 7000 ( 8000 if I use my credit card too)... but I should start with the carits a 08 xr6 turbo auto so far its got adjustable suspension all round ive put on rapids v2 system ( turbo side intake battery relocation intercooler, new piping ) ive also brought a turbosmart 38mm bov Bridgestone re002's all round and a boost gauge waiting to be put on.my goals are about 300rwkw on 91 and some were around 375-400rwkw on 98 ive had a bit of a look around the site and talked to a few people ive since been putting a parts list together slowly, im just not sure about the turbo I should be buying and prices of a few thingsthe parts ive been thinking about are, and rough prices( feel free to correct me put in any thorts no matter how small and even opinions on tuners in Townsville and also prices I should be able to get second hand parts at)xforce 4inch turbo back exhaust $1200injectors, fuel pump, oil pump, surge tank $1500?valve springs $900 second hand f6 turbo or gtx3582R $1000-$2600?xcal3 flash tuner and dyno tune $1750?dba series 4000 rotors x4 $980bendix ultimate pads $240assuming that my prices are close and that I haven't forgot anything you can see if I go the f6 turbo I can afford it straight up but if I go the gtx ill have to save for a few more monthsmy main Q's are will the f6 turbo be able to do what I want will it need work on the gate or anything elseis the gtx worth the extra $1600and is there anything else to add to my parts list and are my prices rightany other help or hints/ tips would be greatand are my power estimates right is the price for the tune alrightand is there any cheaper way to get what im afterill be fitting all parts expt injectors valve spring surge tank and the tune will most likely be done by Aitkenvale auto and dyno townsville Link to comment Share on other sites More sharing options...
Dagabond Bored Member Administrator 35,722 Member For: 22y 15d Gender: Male Location: Dé·jà vu Posted 11/08/13 06:45 AM Share Posted 11/08/13 06:45 AM Not 400. Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 21y 9m 29d Gender: Male Location: Sydney Posted 11/08/13 06:48 AM Share Posted 11/08/13 06:48 AM 08 xr6t, 375 - 400 on 98?yeah nah not going to happene85 maybe Link to comment Share on other sites More sharing options...
Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 3m 28d Gender: Male Location: South West QLD Posted 11/08/13 06:52 AM Share Posted 11/08/13 06:52 AM Intercooler? Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 10d Posted 11/08/13 06:54 AM Share Posted 11/08/13 06:54 AM He wants to put a 35/40 or gtx on ms. I thought the same then read it again.He already has rapid cooler sdpNo valve springs in your price list. Add another $1000 installed.For injectors and surge and pump I'd budget more like $2k. I paid $1300 for pw surge with pump and wiring, $700 for ID1000's then about $300 for those installed Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 1d Gender: Male Location: Canning Vale, W.A Posted 11/08/13 06:57 AM Share Posted 11/08/13 06:57 AM Joe at CMS does the GTX 3582r front housing for around 1650$ delivered to your door. you'll need your rear housing ported and a bigger flapper added. He also does exchanges for your stock one + 350$ for an upgraded housing. + 12psi actuator, around 180-200$?Probably cost around 200$ for the tuner to swap the smaller turbo setup for the bigger one.4' xforce turboback cost me 1620$ + 300-400$ to install1000cc injectors are around 600-700$ + 100-150$ to installSurge tank with a pump is around 1k brand new. + 200-300$ to installTune is around 1500-1700 including the box from most reputable tuners.Valve springs are 250-300$, + 500$ to install (if you know what you're doing you can save alot of money fitting them yourself.) Link to comment Share on other sites More sharing options...
nathanway Member 106 Member For: 13y 3m 23d Gender: Male Location: townsville Posted 11/08/13 09:28 AM Author Share Posted 11/08/13 09:28 AM I've found on Ebay new force mild steel turbo back for 1120 +40 for postage I should be able to fit it my self , ive got access to a car lift at my brothers work,http://www.ebay.com.au/itm/Ford-FG-XR6-Turbo-Sedan-G6E-X-Force-Mild-Steel-4-Turbo-back-System-/151030724706?pt=AU_Car_Parts_Accessories&hash=item232a21f862valve springs are on the list ive allowed 900 for them installedso aaron what your saying I should save up for the gtx 3582R ,ive gotten prices at $2600 for the hole new turbo than id still have the 3540 I could sell/ use on my next project ( ca18det Datsun 1200 that ive been building for a few years now) I do have a surge tank I could use its currently installed on my datto but its years form being completed so I might pinch it might save a bit of money there ,what would it take to get to 375-400 mark on 98 , ive seen the standard turbo can do 320-340 on 98 and I live in Townsville and as far as I know e85 isn't at the pump up hear yet if im only gonna get to about 350ish it seems like its not worth the extra moneyisn't the older ba, bf, and the fg f6 turbo a gt3582 ive seen a few of them for sale for about $1000 I thought the gtx was just a newer better version Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 2d Gender: Male Location: Perth Posted 11/08/13 10:03 AM Share Posted 11/08/13 10:03 AM (edited) GTX has billet compressor wheelinjectors, fuel pump, oil pump, surge tank $1500? = $1600. Oil pump gears installed will be about $1600Just tune for 98 and aim for 350rwkw. Edited 11/08/13 10:03 AM by arronm 1 Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 9d Gender: Male Location: Vic Posted 11/08/13 10:04 AM Share Posted 11/08/13 10:04 AM 08 xr6t, 375 - 400 on 98?yeah nah not going to happene85 maybeI did 400+ on 98 bf turbo. $2500k should get a gtx35 on with a port and actuator though. Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 1d Gender: Male Location: Canning Vale, W.A Posted 11/08/13 10:31 AM Share Posted 11/08/13 10:31 AM A brand new rear housing ported with a bigger flapper was an extra 1100 from memory ontop of the 1600$ for the gtx so I opted just to get my standard housing modified for 350$. But if you have the budget get the entire turbo mate.The gt3582 with all supporting mods is capable of 380-400 on 98. Multiple fg f6's have reached this. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now