Jump to content

Recommended Posts

hey guys, most would know I changed my wrecked bf motor for an fg long. problem im having is car has a strange idle. sounds like a lumpy cam but when you look at the instant fuel usage it sits at like 3.1lt to 3.2lt !! opposed to around 1.7lt to 1.9lt. tuner couldnt find an issue as fuel trims etc are all ok. we are thinking its the map sensor playing up as its the same one that was in my bf when it went bang maybe causing it damage........ anyone heard of this issue before??also when coasting car is pretty jerky as well. other than this the car is boosting properly and is fine on fuel use etc.

Link to comment
https://www.fordxr6turbo.com/forum/topic/85814-strange-idle-after-engine-swap/
Share on other sites

  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 12y 8m 15d

Inlet manifold gasket leak perhaps. My car used to have a really lumpy idle on cold starts.

Progressively got worse.

Replaced the gasket (which had broken completely) and all good.

Same thing on a mates non turbo ba to.

Twice also while this problem was happening it would idle lumpy and really really rich to the point black smoke was coming out the exhaust.

Only happened twice. And stopped after idle smoothed out. Never happened again since though.

Gasket is cheap. Changing it is a complete sh*t job though

Sent from my GT-I9305T using Tapatalk 4 Beta

Ratter : 60lb dekas approx 30,000km old, maybe they are dirty???

Turkey: mate all new gaskets as it was an engine swap, we both sprayed all around edges etc and didn't find anything.

Yeh my tuner tried to raise idle etc to calm the idle but had no success (masked it slightly). Thinking map sensor got damaged when motor blew or maybe dirty injector as oil went everywhere.

  • Bronze Donating Members
  • Member For: 12y 10m 23d
  • Gender: Male
  • Location: cherrybrook

Having similar problem today, idle's like it got a huge cam, put it gear and the car starts to jump forward with the revs

New injectors went in today and a tune, but still doing it

we can't find any air leaks, no codes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'