JVK Silver Donating Members 751 Member For: 18y 11m 6d Gender: Male Location: North West Hot Hell,VIC Posted 25/07/13 09:18 PM Share Posted 25/07/13 09:18 PM How much were the plenums going for guys ? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 1d Gender: Male Location: Perth Posted 26/07/13 01:07 AM Share Posted 26/07/13 01:07 AM good thread is good.Hey Mickus,I have a right angle drive you can borrow.....oh wait nevermind. Link to comment Share on other sites More sharing options...
LOOSEBF Member 106 Member For: 16y 6m 12d Gender: Male Posted 26/07/13 01:48 AM Author Share Posted 26/07/13 01:48 AM JVK- they are 995 plus delivery to the end of this monthMs mine looked similar to that I have got some pics but they're not very good Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 1d Gender: Male Location: Perth Posted 26/07/13 02:00 AM Share Posted 26/07/13 02:00 AM Loose,for future prosperity could you please chuck up the PN of the Housing and hose you used?How do you plan to plumb in the boost pressure sensor? Link to comment Share on other sites More sharing options...
freeze_dk I am dissatisfied with my current employment situation Donating Members 8,610 Member For: 18y 1m 27d Gender: Male Posted 26/07/13 02:12 AM Share Posted 26/07/13 02:12 AM 300 for a fitting kit or a 30$ part. No wonder there loaded Link to comment Share on other sites More sharing options...
LOOSEBF Member 106 Member For: 16y 6m 12d Gender: Male Posted 26/07/13 02:19 AM Author Share Posted 26/07/13 02:19 AM Thermostat housing- W049 Kilkenny castings product (EB 4L)Radiator top hose- 05-0919 gates product (EF 5L bottom hose)Ralph on plaz piping it is connected behind the fog light so the loom can be hidden under the radiator.Aaron that is going to look awesome I'm still deciding whether to paint it or not. Did you buy yours before this sale? Looks like yours is just unpainted and ours is actually 'raw'. Also did you buy that rocker cover setup off Scott? 1 Link to comment Share on other sites More sharing options...
LOOSEBF Member 106 Member For: 16y 6m 12d Gender: Male Posted 26/07/13 02:22 AM Author Share Posted 26/07/13 02:22 AM Also I'm making up the studs needed for this installation in stainless if anyone needs some while I'm at it?Exact same as the ones from nizpro only better. Engineering studs 8x38mm Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 1d Gender: Male Location: Perth Posted 26/07/13 02:35 AM Share Posted 26/07/13 02:35 AM when I purchased my kit back in the day nizpro supplied inconel studs by mistake...expensive mistake for them! Link to comment Share on other sites More sharing options...
LOOSEBF Member 106 Member For: 16y 6m 12d Gender: Male Posted 26/07/13 02:38 AM Author Share Posted 26/07/13 02:38 AM Not quite that bad freeze the fitting kit can be made for around 120+ wiring.(thermostat housing $25, top hose $25, 8xstuds $40, vacuum fittings $30. It's not a terribly bad rip off Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 1d Gender: Male Location: Perth Posted 26/07/13 02:43 AM Share Posted 26/07/13 02:43 AM I can source 25 of 8mm x 30 studs for around $100 if any other the diy guys want to split them between yourselves Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now