AdamIan69 Bronze Donating Members 401 Member For: 12y 1m 4d Gender: Male Location: WA Posted 18/07/13 12:56 PM Author Share Posted 18/07/13 12:56 PM The little plastic screws inside the wheel arch and on the grill are a pain. But put a sharp knife under the head as you undo each one and they'll normally come undone reasonably easy. From memory there is two bolts with 10mm heads in side the top front of each wheel arch. Then about 10 small bolts around the front bottom of the bumper. Then you have the grill which came off easily on mine. The fog light electrical plugs can be a pain to pull apart (push the clip down then force the plugs together then pull apart(putting Vaseline in the plug before re assembly helps stop the plug from seizing in future) and resist pulling on the wires as these plugs are about $15 each to replace). A light to firm pull on the top of the bumper inside of each wheel arch will unclip it. Link to comment https://www.fordxr6turbo.com/forum/topic/85612-nizpro-offset-intercooler-install-pics/page/5/#findComment-1408005 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now