Duz10s New Member 22 Member For: 11y 8m 21d Gender: Male Location: Melbourne Posted 17/06/13 09:10 AM Share Posted 17/06/13 09:10 AM Hi gents first ever post and now a proud first time ford owner of a 2010 G6E turbo, this is my daily driver, will be wanting to keep it looking very sleeper looking but after a bit more performance, I have been a long time VL owner and have owned a few low 10 sec VL's in my time with this being my first foray into the Ford world.I am looking for some nice mods that wont kill the bank manager and keep reliability, some nice spool, flutter and performance maybe around the 300rwkw, after searching and reading up and I am thinking the below- Plazmaman Battery Relocation and 4 inch Intake Kit- Hot side pipe kit- Di Fillipo or another brand cat back 3.5 inch exhaust - New larger flowing cat- Injectors- TuneQuestions are will I need to upgrade the intercooler and looking for a great tuner/workshop in Melbourne's North and am I missing any important things, car also has been already fitted with a LSD.Also injectors, what options are there, are they low or high imp injector types?Really liking this forums and appreciate any help.Thanks Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 8m 20d Gender: Male Location: @ my laptop Posted 17/06/13 09:13 AM Share Posted 17/06/13 09:13 AM spend the money you were going to spend on the cat back to buy an intercooler, you need high impedence injectors otherwise you need to purchase injector drivers Link to comment Share on other sites More sharing options...
mrxd Member 74 Member For: 12y 4m 7d Gender: Male Posted 17/06/13 09:27 AM Share Posted 17/06/13 09:27 AM Based on circumstance and the knowledgeable folk on these forums I've opted for the following for my G6ET: 1000CC Bosch EV14 KPM injectors PW stage 1 no cut intercooler + pipes Venom 100cpi high flow bolt on cat PWR heat exchanger Hopefully good bang for buck, just need to book it in for the tune when I get the time. Good luck with your research! 1 Link to comment Share on other sites More sharing options...
old_mate Member 767 Member For: 19y 3d Gender: Male Location: Brisbane Posted 17/06/13 09:59 AM Share Posted 17/06/13 09:59 AM 300rwkw recipe is simple.ActuatorIntercooler and pipingInjectorsCat Convertertuneintake fuel pumpbeing 2010, I'd also go valve springs Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 10m 27d Gender: Male Location: Vic Posted 17/06/13 10:06 AM Share Posted 17/06/13 10:06 AM Based on circumstance and the knowledgeable folk on these forumsI've opted for the following for my G6ET:1000CC Bosch EV14 KPM injectorsPW stage 1 no cut intercooler + pipesVenom 100cpi high flow bolt on catPWR heat exchangerHopefully good bang for buck, just need to book it in for the tune when I get the time.Good luck with your research!You are doing it right. People, do what he's doing. Link to comment Share on other sites More sharing options...
mrxd Member 74 Member For: 12y 4m 7d Gender: Male Posted 17/06/13 11:54 AM Share Posted 17/06/13 11:54 AM You are doing it right. People, do what he's doing.Cheers Henz... pics of said gear.http://imgur.com/Y6ynDGVfkn tapatalk Link to comment Share on other sites More sharing options...
wa g6et Member 657 Member For: 13y 8m 13d Gender: Male Location: Perth NOR Posted 17/06/13 12:19 PM Share Posted 17/06/13 12:19 PM +allow for waste gate porting if you opt for a full exhaust. Link to comment Share on other sites More sharing options...
Duz10s New Member 22 Member For: 11y 8m 21d Gender: Male Location: Melbourne Posted 22/06/13 11:05 AM Author Share Posted 22/06/13 11:05 AM Thanks for the replys, ended up pulling pin on the 2010 I laid a deposit and and went brand new 2013 G6E turbo, might put some km's on it and try and collect performance parts as I go.Is the PW stage 1 cooler good replacement or are the Nizpro coolers better? I don't want to have to cut anything as you can imagine on a new car Link to comment Share on other sites More sharing options...
Coop450 Member 144 Member For: 12y 8m 20d Posted 30/07/13 09:01 AM Share Posted 30/07/13 09:01 AM I have the process west stage 1 on my 09 G6E T mate and can't fault it, it is a great bit of gear and best of all no cutting at all. Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 10m 27d Gender: Male Location: Vic Posted 30/07/13 10:08 AM Share Posted 30/07/13 10:08 AM The nizpros better but requires plenty of cutting. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now