Huz88 Member 13 Member For: 12y 8m 15d Posted 21/05/13 12:10 PM Share Posted 21/05/13 12:10 PM Hi guys,Just got my ute back together after a engine rebuild..Had to jump start it as it was sitting for a couple months. Started and ran really nice.Took it for a drive ran fine. Stalled at set of lights, but was fine after that and along the hiway. On the way home stalled again at lights and stalled several times in the drive-way.After it stalls, the engine light flashes 3 times ( not sure if that means anything).Any ideas?CheersIan Link to comment Share on other sites More sharing options...
Huz88 Member 13 Member For: 12y 8m 15d Posted 24/05/13 09:17 AM Author Share Posted 24/05/13 09:17 AM Kept doing this very bad. Checked codes and found 2.P1386 Variable Cam Timing Overadvanced (Bank #2) P1388 Variable Cam Timing Overretarded (Bank #2) Ended up unplugging the power steering switch.. Runs really nice now, but engine light has come back on after a while with the same 2 codes but still running fine.Check Cam phasors next? Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 3m 26d Gender: Male Posted 25/05/13 10:31 PM Share Posted 25/05/13 10:31 PM Sounds like timings out or cam caps are not in their correct positions Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 5m 26d Gender: Male Location: @ my laptop Posted 26/05/13 12:26 AM Share Posted 26/05/13 12:26 AM timing would not normally have advanced and retarded on the same bank, but to me it sounds like the wrong cam caps as well Link to comment Share on other sites More sharing options...
Huz88 Member 13 Member For: 12y 8m 15d Posted 27/05/13 11:51 AM Author Share Posted 27/05/13 11:51 AM Thanks guys. Checked timing, definately not out. No crap in the phaser oil gallerys or filters etc swapped phasers to see if it shifted the problem to inlet side.. Code came up once on the weekend when it was cold (retarded exhaust side) . Cleared it and hasnt come back up since..Sounds like it might be worth checking the cam caps though.Anyway of telling if they're in the wrong spots? Ian Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 5m 26d Gender: Male Location: @ my laptop Posted 28/05/13 12:51 AM Share Posted 28/05/13 12:51 AM cams should turn freely when no chain or lifters etc are in place Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now