Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 23d Gender: Male Location: Perth Posted 21/05/13 04:48 AM Share Posted 21/05/13 04:48 AM Anybody out there who has fitted a FP9042:To a manual car? Specs say auto only. Aerpro say its because the manual shifter surround is longer and fouls the bottom section. Keen to see if anybody has modded one to fit a manual and has pics?cheerspaint it blackpotatoheater mixer shaft motor windingsmonza cooler Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 2m 22d Gender: Male Location: Probably above atmospheric pressure Posted 21/05/13 06:06 AM Share Posted 21/05/13 06:06 AM I have it on good authority that this is not 100% certified unlike mine and thus you will encounter endless firmware related crashes.I have various types of hand saw, leave your car outside and I'll take care of the fitting.Might even break in your clutch for you, no charge!Seriously though...diff bush. Link to comment Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 9m 21d Gender: Male Location: Brisbane Posted 21/05/13 06:32 AM Share Posted 21/05/13 06:32 AM Depends on what valve springs & coil packs you're running. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 23d Gender: Male Location: Perth Posted 21/05/13 06:37 AM Author Share Posted 21/05/13 06:37 AM ^lol at these to trying to make out like they know what any of those technical terms meanHey Tab, best go check your ventilation system..... Link to comment Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 9m 21d Gender: Male Location: Brisbane Posted 21/05/13 06:45 AM Share Posted 21/05/13 06:45 AM Don't be all jealous just because my fuel system has its own heat exchanger. Seriously though is it claimed to be an 'issue' to fit or when in use? I'm certain I've seen one in a manual but fcks me whose car it was. ...must have been ages ago as I thought they had phased-out the old tractor gearboxes. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 15d Gender: Male Location: Adelaide Posted 21/05/13 06:48 AM Share Posted 21/05/13 06:48 AM HAHAH oh dear , 8 F bro ,in my datenever seen one in a manual but couldn't be that hard to jimmy uphad one in my BA and looked real nice and colour matched bangers !! Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 2m 24d Gender: Male Location: SE Melbourne Posted 21/05/13 06:54 AM Share Posted 21/05/13 06:54 AM I <3 Taint2256 Link to comment Share on other sites More sharing options...
The Jizard GONE FULL WIZARD Donating Members 1,617 Member For: 16y 1m 9d Gender: Male Location: 720 East Kensington Road Posted 21/05/13 09:35 AM Share Posted 21/05/13 09:35 AM Needs more diff bush otherwise it will fall out with diff clunk, half shafts wouldn't cope with the extra power from the sound system, needs forged pistons to take the extra pound(ing) from the subwoofer, and the clutch won't take the extra weight of a head unit. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 23d Gender: Male Location: Perth Posted 21/05/13 10:26 AM Author Share Posted 21/05/13 10:26 AM Actually needs more clearance between shifter surround and facia. Have measured, won't fit. Thanks for nothing you bunch of highway loving egg lickers. Inb4othermodspostinlockedthread 1 Link to comment Share on other sites More sharing options...
tab Sucker Moderating Team 32,303 Member For: 20y 9m 21d Gender: Male Location: Brisbane Posted 21/05/13 10:43 AM Share Posted 21/05/13 10:43 AM cheers Link to comment Share on other sites More sharing options...
Recommended Posts