Jump to content

Is This How The Outside Diff Bushes Are Meant To Sit?


Falky100

Recommended Posts

  • Donating Members
  • Member For: 13y 1m 7d
  • Gender: Male

As the title says.

I am getting a bad clunk at the moment which has just started.

And for a while now I get a bad really fast knocking sound coming from the rear on takeoff when I let the clutch out (mainly when the car is under heavy load). It is quite bad with a box trailer on too.

All the 3 bushes seem to be intact all I could find out of place under the rear was what you can see in the pics.

The passenger side doesnt even have a plate on it and looks to be sunk back inside the bore. The drivers side plate is sticking out above the bore and the bush inside the bore also looks short.

post-48623-136764133926_thumb.jpg

post-48623-136764135698_thumb.jpg

Sorry if the explanation doesnt make alot of sense or if the pics arnt the best.

John.

Link to comment
Share on other sites

  • Member
  • Member For: 12y 4m 25d
  • Gender: Male
  • Location: Maryborough Qld

dam! its the stabalise bar link, its punched through the arm buy the looks of it. new arm needed, I was lucky enough to get a brand new arm from a fg for my BA for 50 bucks lol seconhand they wanted 80 each....ebay your friend

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 1m 7d
  • Gender: Male

The damn bushes clapped out and the nut pulled through the hole. Cracked all around the hole as you can see. So out with the mig and welded the cracks up the best I could in the space I had. Lucky the linkage is still ok.

$40 for 2 new bushes + nuts from ford.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 1m 7d
  • Gender: Male

The knocking sound is still there after I have been driving around with no sway bar on the rear. So you think it could be the driveshaft bearing that's causing the strange quick knock, Il check it out. Thanks bionic :)

Edited by Falky100
Link to comment
Share on other sites

  • 1 month later...
  • Donating Members
  • Member For: 13y 1m 7d
  • Gender: Male

Hey bionic, finally got to my car this afternoon and checked the bearing. Well you are 100% correct. The rubber is completely shot.

Do you have a rough price in this part? Or will a $65 one from ebay do the trick?

http://bit.ly/1cDgtgX

Cheers bionic.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'