Anyone Got Pics Of Ba/bf Typhoons With Lowered Kings Springs?

[fpv229]

looking to lower my bf mk2 rspec, most likely with king springs...just wanting to see pictures so I can roughly see what it will look like.

cheers

[Pilko13]

That's with the king springs

[fpv229]

what springs are they mate (SL, SSL??)..im looking to probabaly go abit lower.

[EFSIX]

hey buds for the rear if you want that real lowered stance throw some Expensive Daewoo vn rear springs in it (ssl) tuck under the rear quarters nice!

[turbo proud]

For good stance I have been advised to fit OZracing coilovers with + - 70mm check link. Not sure if you get them in Aussie but that's what I have been advised to use here in NZ

http://justjap.com/store/product.php?productid=20445&cat=554&page=1

[turbo proud]

I'm running 19's and they should tuck nicely in to the arches using the OZ racing adjustible coilovers

[Pazzo]

My old BFMk2 xr6t had SSSL fronts and SSSSL rears.. Can put a pic up if you want but it's not a typhoon .. But may help

[fpv229]

  On 22/05/2013 at 8:29 PM, WOGPOT said:

My old BFMk2 xr6t had SSSL fronts and SSSSL rears.. Can put a pic up if you want but it's not a typhoon .. But may help

yeh can u put up a pic mate? im running SSL rear and SL fronts but its still too high lol

[Pazzo]

[dastard1]

I just fit ultras front and back to my bf typhhon, looks sweet but found its too low for my liking, ultras are ssl front and sssl rears , always add another s for the rear when talking kings, anyhow my typhoon with this set up looks lower than the pic above, I dont think the comment that they are sssl front and ssssl rear is correct.

im taking the ssl out of the front and fitting sl instead, im selling the front springs for under rrp if your interested pic was taken same day fitted, they have setled prob 5mm lower than the pic