xx_D6_xx Member 73 Member For: 12y 4m Gender: Male Location: Adelaide Posted 26/04/13 03:20 PM Share Posted 26/04/13 03:20 PM Purchased this car about 7months ago and have made it my little project ever since. After having 2 twin turbo Aristo's I decided the single was the way to go- although giving up the sound of a 2J is hard, but definitely glad I did Purchased it stock only with a set of CSA 19's on it. Mods right now (After 2months of hard work) are:Process West CAIHDI FMIC KitXforce 4' dump to full 3.5' systemVarrstoen 2.2.2's 19x9.5 +22 fronts and 19x10.5 +22 rearsAll LED globesAutometer cobalt series boost and oil pressure gaugesAUX cableHKS turbo timerTaxi dash matPWR Trans coolerGuards rolledXR8 BonnetRDA 4000 series front rotors with Bendix padsWalbro 550lph intank fuel pumpThis is it with the following mods (plus work in progress shots)Its no wlike this- Ready for the following to go in and tune to be done at Heinrich Performance:600cc injectorsbraided turbo line12psi actuatorNGK iridiumsValve springs & RetainersTune SCT Xcal3Hoping for anything over 330kw, but I have a sneaking suspicion my gearbox or turbo will have other ideas. It goes in on tuesday so wish me luck!! will update this once its done and will be getting some decent photos done once its been detailed D6 Link to comment Share on other sites More sharing options...
JVK Silver Donating Members 751 Member For: 18y 10m 27d Gender: Male Location: North West Hot Hell,VIC Posted 26/04/13 10:27 PM Share Posted 26/04/13 10:27 PM Nice ride. Youve done a nice job with that car in the short time of ownership. 330+ sounds like fun! 1 Link to comment Share on other sites More sharing options...
Pixy Angel Expert Donating Members 9,132 Member For: 19y 8m 18d Gender: Male Location: North Jamberoo, NSW Posted 26/04/13 10:44 PM Share Posted 26/04/13 10:44 PM Well done mate nice turn around. I'm not sure about the wheels maybe it's just the rear wheels that's putting me off. Stick out to far.Looks good!!! Link to comment Share on other sites More sharing options...
xx_D6_xx Member 73 Member For: 12y 4m Gender: Male Location: Adelaide Posted 30/04/13 11:37 AM Author Share Posted 30/04/13 11:37 AM went in today..... so pumped to see how it comes out Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 5m 28d Gender: Male Location: adelaide hills- 'race air' central Posted 30/04/13 11:53 AM Share Posted 30/04/13 11:53 AM yeah that much poke on the rear looks weird without a bit of guard flaring. Link to comment Share on other sites More sharing options...
xx_D6_xx Member 73 Member For: 12y 4m Gender: Male Location: Adelaide Posted 01/05/13 02:59 AM Author Share Posted 01/05/13 02:59 AM I'm lookin at getting them machined eventually to they don't poke out as much... It's a bit too much for me :/ Link to comment Share on other sites More sharing options...
Nickaz Member 7 Member For: 11y 8m 13d Gender: Male Location: Melbourne Posted 16/05/13 07:10 AM Share Posted 16/05/13 07:10 AM this car is my favourite so far! exactly how I want to do mine! omg I love it. looks so good man, can I ask what height your car is? I want to get the same rims, but how low could I go with that offset without rubbing? thanks man Link to comment Share on other sites More sharing options...
Nickaz Member 7 Member For: 11y 8m 13d Gender: Male Location: Melbourne Posted 16/05/13 07:22 AM Share Posted 16/05/13 07:22 AM im so jealous :( I still need more money for this. Link to comment Share on other sites More sharing options...
MA91CK billet turbos and weathered engines dont mix Donating Members 1,346 Member For: 12y 5m 23d Gender: Male Location: Wollongong Posted 16/05/13 10:18 PM Share Posted 16/05/13 10:18 PM No way! Poke FTW! Just massage your guards out a little. You'll show in 330 pretty easy, watch the engine though being BA your tuner might suggest to limit it until you strengthen the internals Link to comment Share on other sites More sharing options...
xx_D6_xx Member 73 Member For: 12y 4m Gender: Male Location: Adelaide Posted 17/05/13 06:43 AM Author Share Posted 17/05/13 06:43 AM this car is my favourite so far! exactly how I want to do mine! omg I love it. looks so good man, can I ask what height your car is? I want to get the same rims, but how low could I go with that offset without rubbing? thanks manthanks mate! car is stock height with just the rear guards rolled. wheels scrub a tiny bit when going up steep driveways but other then that its fine No way! Poke FTW! Just massage your guards out a little. You'll show in 330 pretty easy, watch the engine though being BA your tuner might suggest to limit it until you strengthen the internalscar was tuned last week and made 334.4kw atw- but gets no traction even with those tires on it :\ so much fun though Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now