Scruby Donating Members 71 Member For: 15y 7m 18d Gender: Male Location: Melbourne Posted 25/04/13 02:33 AM Share Posted 25/04/13 02:33 AM Ah no worries, I'll have to rummage around the threads a tad more.Pretty cool that changing it to left hand drive can make such a difference. Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 2m Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 25/04/13 10:29 AM Share Posted 25/04/13 10:29 AM dion must weigh a I <3 Bananas lot to hold down 600+ 1 Link to comment Share on other sites More sharing options...
hightides Banned 16 Member For: 13y 4m 3d Posted 26/04/13 03:16 AM Share Posted 26/04/13 03:16 AM The car made over 900rwhp the week before for APSA Portland. It has been said The dyno is a low reading dyno. That starlet was on the NOS on the 307 run. Was detonating but he cranked up the juice just for the run. Won him $800 so was worth it if the motor hasn't sh*t itself. That mustang sh*t a spark plug on the dyno so may not of gapped it properly when replaced who knows.It is a drag car from the looks of it. No windows bar front, tray bottom was gutted and replaced with some light material. I hear it will be braking records this weekend so eyes peeled. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 9m Gender: Male Location: @ my laptop Posted 26/04/13 03:41 AM Share Posted 26/04/13 03:41 AM low reading dyno?Mainlines are all calibrated before leaving the factory, I had mine checked after it was moved twice and about 4 years worth of work and it was less than 0.3% different to their calibration scale Link to comment Share on other sites More sharing options...
hightides Banned 16 Member For: 13y 4m 3d Posted 26/04/13 03:52 AM Share Posted 26/04/13 03:52 AM Because every dyno in victoria is a mainline dyno. Where did I compare it to other mainline dyno? Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 9m Gender: Male Location: @ my laptop Posted 26/04/13 04:31 AM Share Posted 26/04/13 04:31 AM . It has been said The dyno is a low reading dyno. . Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 27d Gender: Male Location: Adelaide Posted 26/04/13 06:01 AM Share Posted 26/04/13 06:01 AM Mainline's are spot on and repeatable Found out first hand Link to comment Share on other sites More sharing options...
F1PERFORMANCE Donating Members 104 Member For: 15y 11m 14d Gender: Male Location: VIC Posted 26/04/13 09:17 AM Share Posted 26/04/13 09:17 AM Ramp rates only affect power cause the drive train inertia figure you are using is to high get that rite and a 15 or 20km per second ramp rate will make no difference. example 8 and 8F - shootout has fixed figures as it mode used to provide equal conditions for dyno days / competitions- the only variables will be tie down and air temp sensor. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 8m 27d Gender: Male Location: Adelaide Posted 26/04/13 11:54 AM Share Posted 26/04/13 11:54 AM Correct to high a speed ramp and the car wont keep up and u will get a crap figure but a to low speed rate and u will spin the wheels Figures in between this can "generally" read correct but that's why speed ramps are important like anything else Link to comment Share on other sites More sharing options...
#96 Member 281 Member For: 12y 3m 2d Posted 26/04/13 01:21 PM Share Posted 26/04/13 01:21 PM I'm learning Link to comment Share on other sites More sharing options...
Recommended Posts