Alion Member 27 Member For: 16y 8m 1d Gender: Male Location: Figtree, Wollongong, NSW, 2525 Posted 28/03/13 11:03 AM Share Posted 28/03/13 11:03 AM Hey Lady's and Gents,Well I am having a few issues with the G6ET It has a bad diff bush, it makes a knocking noise somewhere at the front of the car when the road is a little bumpy. Does any one know what causes this.HOWEVER the big problem is the ZF I think. After short drives now the thermo fans are staying on after the car is turned off? The temp on the dash is normal but we all know that is not the most important temperatures. The box feels like it is slipping and every time is does I think the car is pulling back on the acceleration. Is this normal? It is happening badly in 3rd and 4th up hills when in tip-tronic mode. When in lower gears this doesn't happen at the higher revs all seems fine. Also the shifts is really hard and delayed. Do my assumptions seem correct? This is my first auto and really know nothing about them other then the ZF is different to most of them. If you could help with this it would be great. The car was bought from a dealer with the 3mth warranty so it should be covered right? All help is much appreciated guys.Regards,Allan Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 15y 11m 14d Gender: Male Location: CQ Posted 28/03/13 11:35 AM Share Posted 28/03/13 11:35 AM Take it back to the dealer and let them worry about it mate...is your engine coolant nice and green or does it look like someone has poured a milkshake into it? 1 Link to comment Share on other sites More sharing options...
Alion Member 27 Member For: 16y 8m 1d Gender: Male Location: Figtree, Wollongong, NSW, 2525 Posted 28/03/13 11:47 AM Author Share Posted 28/03/13 11:47 AM (edited) Milkshake :( A bad looking chunky milkshake Edited 28/03/13 11:48 AM by Alion Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 15y 11m 14d Gender: Male Location: CQ Posted 28/03/13 12:04 PM Share Posted 28/03/13 12:04 PM I suggest you have a look in the zf milkshake thread, but definately take it back to the dealer a dead zf is a very costly problem that they should come to the party with Link to comment Share on other sites More sharing options...
Alion Member 27 Member For: 16y 8m 1d Gender: Male Location: Figtree, Wollongong, NSW, 2525 Posted 28/03/13 12:17 PM Author Share Posted 28/03/13 12:17 PM Thanks for the help. Might send the guy and email and see what happens if I don't get the right noises might get work to follow it up. Again thanks for the help Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 29d Gender: Male Location: Probably above atmospheric pressure Posted 29/03/13 12:43 AM Share Posted 29/03/13 12:43 AM You are just lucky it happened inside the bonus warranty period! Link to comment Share on other sites More sharing options...
CLuTZ Donating Members 227 Member For: 13y 6m 6d Gender: Male Location: Melbourne Posted 29/03/13 05:42 PM Share Posted 29/03/13 05:42 PM Claim ASAP. The longer you leave it, the more of an opportunity they have to try and shaft you. 1 Link to comment Share on other sites More sharing options...
Alion Member 27 Member For: 16y 8m 1d Gender: Male Location: Figtree, Wollongong, NSW, 2525 Posted 11/04/13 02:02 AM Author Share Posted 11/04/13 02:02 AM Hey guys,Well its being fixed ATM but there telling me that after a good flush. and once the milkiness is out the gear box will be fine I want to know if this is right or do I get fair trading involved and talk to ZF to get there expert option? Any useful input is greatly appreciated CheersAllan Link to comment Share on other sites More sharing options...
my270 Member 36 Member For: 12y 1m 5d Gender: Male Location: Dubbo, Central West NSW Posted 11/04/13 03:13 AM Share Posted 11/04/13 03:13 AM It will be in the mechatronics unit itself and all through your clutch packs if milkshake has occured and will need to be pulled apart and rebuilt. They are trying to get out of it cheap and hoping a flush will mask the real problem. Link to comment Share on other sites More sharing options...
gsd112 Donating Members 604 Member For: 14y 2m 17d Gender: Male Location: Penrith Posted 11/04/13 05:48 AM Share Posted 11/04/13 05:48 AM (edited) I know 2 guys that have had it and its a total rebuild including the mechatronics. no way around it, tell them to fully rebuild or replace with a new one if not speak to fair trading immediately.... Edited 11/04/13 05:49 AM by gsd112 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now