JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 27d Gender: Male Location: Adelaide Posted 02/03/13 11:28 PM Share Posted 02/03/13 11:28 PM Are u guys brothers ............. Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 17d Gender: Male Posted 03/03/13 12:29 AM Share Posted 03/03/13 12:29 AM (edited) Hahahahah sounds like it.It took me two weeks to fit a fuel rail! I feel your pain... Edited 03/03/13 12:30 AM by Kosij Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 27d Gender: Male Location: Adelaide Posted 03/03/13 05:27 AM Share Posted 03/03/13 05:27 AM Hows the fuel pressure now ? Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 17d Gender: Male Posted 03/03/13 08:12 AM Share Posted 03/03/13 08:12 AM Lol.... I adjusted it while the vacuum line was off hahahahaha once I put the vacuum line on it dropped to 50psi so I was smashing it around for a week with 50psi instead of 60!!!!! No harm done lol Link to comment Share on other sites More sharing options...
45T-XR Donating Members 417 Member For: 17y 8m 21d Gender: Male Location: Gladstone, Queensland Posted 03/03/13 08:47 AM Share Posted 03/03/13 08:47 AM 58psi with vac line off at idle Link to comment Share on other sites More sharing options...
Stevebag Member 26 Member For: 11y 1m 19d Posted 25/09/14 02:38 AM Share Posted 25/09/14 02:38 AM Hi All.....Any help muchappreciated. I am having intermittent cruise control issue. Have searched and read a number of posts, taken it to Ford, and want to pick your brains....any suggestions much appreciated.Description:Near new FG11 turboIf I turn on cruise and engage the cruise within a minute or so of driving - it acts normally and sets.If however - I happen to jump in, and drive for a little while before engaging and setting cruise, it wont workIt powers up the cruise, but it wont setPull over, turn car off and re start, and works fine againYesterday at ford - service guy daid he was stumped - it threw up error code B10AC-1PLInternet indicates that B10AC, Circuit of cruise control switch faultyQuestions:Anyone had similar issues? any wisdom to share?Most common discussion on forum is the brake pedal switch. Would a faulty switch really do this intermittent fault?I assumed faulty switch would just go 'hard/permanent' fault? ie - not reset when I turn car off then on?Dont believe its hand brake sensor as someone else mentions - as I get no handbrake chime / light come onSomeone mentioned ICC firmware update - may have caused a cruise issue? What is the link between ICC firmware and cruise?Someone mentioned OBD port / stuff may caue cruise issue? What is an OBD port, and why would it potentially case cruise grief?Mention of phone bluetooth potentially impacting?It seems to have me sumped....certainly the dicks at ford are stumped.....they asked me to leave the car for two days next time so they can get to the bottom of it.I dont want em ripping the car apart guessing - so if anyone has ideas....such as....start with brake switchthen try ICC firmware updatethen try cruise moduleetc etc.....they really seem to have no freaking idea!Ta,Steve Link to comment Share on other sites More sharing options...
f-wolf Member 897 Member For: 17y 7m 2d Gender: Male Location: ACT Posted 25/09/14 04:13 AM Share Posted 25/09/14 04:13 AM Here you go... Hope this is of some help. FG Cruise Control Problemshttp://www.fordaustraliaforums.com/forum/showthread.php?51606-FG-Cruise-Control-Problems Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 28d Gender: Male Location: WA, Perth Posted 25/09/14 05:16 AM Share Posted 25/09/14 05:16 AM (edited) Stevebag, there is some sort of safety thing built into the FGs. If you drive off without hitting the brake pedal once, the cruise control will not engage. It keeps flashing on the dash and will not stay lit up.That being said they did also replace the cruise control switch near the brake pedal as it was faulty. I am not sure what code came up as they did not tell me. Edited 25/09/14 05:20 AM by masda74 Link to comment Share on other sites More sharing options...
Stevebag Member 26 Member For: 11y 1m 19d Posted 25/09/14 08:09 AM Share Posted 25/09/14 08:09 AM Masada 74 -!Yeah I was aware that the cruise needs to see a brake signal.....I'm in the city, so no issue from that point. On the brake straight awY! Thanks for the link f wolf.....all seem to focus on brake switch.....If anyone else has further suggestions - keep em coming.Will let you know what ford says when I get it in. Link to comment Share on other sites More sharing options...
Rab WOT? Moderating Team 10,981 Member For: 11y 9m 2d Gender: Male Location: Frankston, 3199 Posted 25/09/14 08:34 AM Share Posted 25/09/14 08:34 AM I did have a car a while ago where something in the trailer light loom was causing the car to not let the cruise control activate at all, or cause it to turn off.Loose wire or something that made the cruise control think I'd hit the brakes or chose reverse - randomly and was a *beep* to hunt downIs a pretty long shot, but you did ask for other suggestions Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now