xyxr6turbo Member 5 Member For: 12y 8m 6d Posted 25/02/13 12:29 PM Share Posted 25/02/13 12:29 PM Gday guys im trying to work out what bang for buck or pros and cons for plenum/intake side is the way to goProcess westNizpro cobra intakeviper atomicplazmamanAre there any bad upgrades? or bad choices with these and what one works the best?There is not alot of info out there about people using these,I do see people who make these go on about how theres is the best,I personaly like to see people finding good resualts on these so I know I can too.Cheers. Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/ Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 9m 8d Gender: Male Posted 25/02/13 01:24 PM Share Posted 25/02/13 01:24 PM I had a rapid cooler and turbo side intake... Made 310rwkw at 18psi!Got rid of the cooler and fitted a plazmaman cooler and plenum! Power went up to 345rwkw with 16psi so the plazmaman gear deffanlty is good. These figures were done at a reputable tuner so I'm not just talking out of my ass lolAll in all can't fault plazmaman for service and workmanship. Top notch gear. Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/#findComment-1366508 Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 9m 22d Gender: Male Posted 25/02/13 08:50 PM Share Posted 25/02/13 08:50 PM +1 for plazmaman 1 Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/#findComment-1366529 Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 6m 23d Gender: Male Location: Far north queensland Posted 25/02/13 09:22 PM Share Posted 25/02/13 09:22 PM I have process west plenum.Hypertune/dlm one looks the goods though Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/#findComment-1366534 Share on other sites More sharing options...
joe@cms Member 129 Member For: 15y 11m 4d Gender: Male Posted 25/02/13 10:18 PM Share Posted 25/02/13 10:18 PM all the above plenums give great results & value for money but the one that stood out for me was the Hyper tune not the cheapest but very impressed with the final resualtsjoe Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/#findComment-1366541 Share on other sites More sharing options...
Dirty32 Legendary member!! Donating Members 1,739 Member For: 18y 3m 27d Gender: Male Location: Dianella, West Oz Posted 26/02/13 02:40 AM Share Posted 26/02/13 02:40 AM Iv got a new and unused Plaz plenum sitting here if your interested...Shame, but im selling up.PM me if your keen! Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/#findComment-1366619 Share on other sites More sharing options...
xyxr6turbo Member 5 Member For: 12y 8m 6d Posted 26/02/13 03:16 AM Author Share Posted 26/02/13 03:16 AM I can get my hands on a process west plenum but im unsure if that's the right thing to do?I take it needs a aftermarket fuel rail or the stock one fits?is the stock fuel rail big enuff for around 500-600 hp atw? Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/#findComment-1366624 Share on other sites More sharing options...
pro346 Member 63 Member For: 13y 1m 8d Posted 26/02/13 03:19 AM Share Posted 26/02/13 03:19 AM What were the differences joe?? I read some where that the hypertune will give more hp but less torque than the process west?? is this true or is the hypertune better every where in the rev range?? Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/#findComment-1366625 Share on other sites More sharing options...
joe@cms Member 129 Member For: 15y 11m 4d Gender: Male Posted 26/02/13 08:42 AM Share Posted 26/02/13 08:42 AM I can definitly say that it was good all round as far as torque goes the one in question is on my sponcers section I made 418rwkw & 1200nmjoe Link to comment https://www.fordxr6turbo.com/forum/topic/84131-xr6t-plenumintake-manifold-the-best-way-to-go/#findComment-1366716 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now