Time For Some Mods

[jacksplatt11]

Hey guys, I know this has been done a million times before, but I thought I'd do it one more time. It's time to do some mods on my BFII XR6T, this is what I'm thinking

Injectors - Haven't decided on type

Fuel pump - Haven't decided on type

Cat/exhaust - Undecided on whether I just want to get a faster flowing cat, or change the whole exhaust

Intercooler - Process West stage 2

Induction - Thinking just stock airbox with F6 second snorkel

and a tune obviously

Also thinking about adding some Whiteline sway bars, seem to be good value for money when it comes to handling

I'll leave the undecided items up to the tuner, which is most likely going to be Bluepower

Not chasing a figure, and would rather have a safer tune than push any components to their limits, but I'm thinking I should easily get over 300kw, so yeah, anyone got anything to add, my main worry is the stock airbox won't provide enough airflow

Also I should probably ask in the PW forum or directly but can you get their intercoolers in black?

Cheers

[Henz]

Sure can get them in black.

Factory airbox with a filter is fine.

And I would say find a tuner better suited to turbos, Pitlane, Nizpro, springy, or Dynomite.

[knoles]

Very similar to my mods that I'm doing at the moment. I've got ID 1000 injectors (your tuner will recommend what they know best) and std f6 airbox. I've just bought a 2nd hand nizpro exhaust and a new nizpro stg1 cooler kit (was tossing up between PW stg2 and nizzy). Got a walbro pump also and getting waste gate done. Tuner said to expect around 330rwkw. I would have just got a dump and cat to bolt up to std exhaust but this one came up so jumped on it.

What you should get depends on how far you want to go in the end. All my mods will accommodate what I want down the track.