Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 6d Gender: Male Location: Perth Posted 20/10/13 01:53 AM Share Posted 20/10/13 01:53 AM J@ wants the shaft 1 Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 4d Gender: Male Location: Probably above atmospheric pressure Posted 20/10/13 02:03 AM Share Posted 20/10/13 02:03 AM At least he's price conscious about wanting the shaft. Pics of Jet posted on shaft? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 29d Gender: Male Location: Adelaide Posted 20/10/13 03:29 AM Share Posted 20/10/13 03:29 AM J@ is the shaft lover from way back,sack n crack Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 4d Gender: Male Location: Probably above atmospheric pressure Posted 20/10/13 08:01 AM Share Posted 20/10/13 08:01 AM You talkin' 'bout Shaft...I can dig it. 1 Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 10m 16d Gender: Male Posted 08/11/13 10:05 AM Author Share Posted 08/11/13 10:05 AM Aaaaaaaarrrrggh, was meant to get my tailshaft back today but it wont be ready until Monday!!! What the!!!! This waiting is a pain in the butt!! Have changed over the yoke on diff so hopefully there will be no vibrationJust want it all going already!!!!Kind regards Jon Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 10m 16d Gender: Male Posted 16/11/13 10:18 AM Author Share Posted 16/11/13 10:18 AM Hi everyone, well I got my tailshaft in and all the little bits done with a base tune. So I took it for a gentle spin, 80kmph slight shudder? 100kmph wasn't good at all. Was hoping to have it ready for the nationals next Saturday but I don't reckon its going to make it!!! I reckon it will shake the car to bits by the end of the quarter! Aaaaaaarrrgh. I kinda had that feeling the tailshaft balance bug would bite me....damn it!!! I wasn't going to replace the rear CV, but after hearing some horror stories of them self destructing I went for a yoke change and an 1150 uni on the rear. I spoke with my mate at Ford and we are going to try and do an on car balance job with the Ford tool (was WDS when I worked for them) and some weld on weights. Will see how we go, otherwise its back to the tailshaft mob with the said large tailshaft and a tub of Vaseline, actually I will skip on the Vaseline after this headache. Sorry for dragging out a simple build up people. On a side note the GTX76 feels just as responsive as the OEM 76 but I haven't buried the foot until its on the rollers and AFR's are good Will post some pics soon Kind regards Jon Link to comment Share on other sites More sharing options...
Z2TT Member 714 Member For: 12y 6m 2d Posted 16/11/13 04:01 PM Share Posted 16/11/13 04:01 PM Excellent, Keen to hear how the GTX3576r Goes, I may be upgrading to this Turbo on my FG Soon and hope to give some info out too on how it drives. Link to comment Share on other sites More sharing options...
BRK Member 361 Member For: 12y 11m 16d Gender: Male Location: Perth Posted 16/11/13 11:58 PM Share Posted 16/11/13 11:58 PM The 3576r story is an interesting one. Can either of you tell me what size the wastegate is on that unit? As for the tailshaft............ the upgrades do not look to be as simple-a-job as it appears. Final Drive Engineering in WA told me they have done them but it was not a routine job to get it right. Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 10m 16d Gender: Male Posted 17/11/13 12:25 AM Author Share Posted 17/11/13 12:25 AM Hi Bud, I went for a Garret housing that had a bigger gate port over the Ford unit, we then ported it out to around 35mm from memory. There is around a 1.5-2mm seat for the flapper. Here is a pic of the said shaft. I am going to try and rotate it 180deg today and see if that changes anything slightly.As soon as its tuned I will post as much data as I can regarding the lil 76GTX. Just gota get this TS bug sortedKind regards Jon Link to comment Share on other sites More sharing options...
LU82 Bronze Donating Members 569 Member For: 11y 10m 4d Posted 17/11/13 01:10 AM Share Posted 17/11/13 01:10 AM The 3576r story is an interesting one. Can either of you tell me what size the wastegate is on that unit? As for the tailshaft............ the upgrades do not look to be as simple-a-job as it appears. Final Drive Engineering in WA told me they have done them but it was not a routine job to get it right.Did final drive say much about their one piece carbon fibre tailshaft that still runs a cv ?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now