Stigmata Donating Members 235 Member For: 11y 10m 16d Gender: Male Posted 02/09/13 10:51 AM Author Share Posted 02/09/13 10:51 AM I know what u mean about twins being less droney. Will make my own mufflers, reckon it should b pretty good. Kind regards Jon Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 10m 16d Gender: Male Posted 14/09/13 11:15 AM Author Share Posted 14/09/13 11:15 AM Hi Everyone, my apologies for not being online much of late. I have finally started the work on my G6 with today spent measuring the front for the new cooler, its a light weight tube and fin from Europe. Its going to be a tight fit compared with the PWR stepped unit. I removed the OEM 76 and have the GTX 76 ready to bolt on in the morning Hopefully I should have all the work/mods done in a few weeks. Here are some pics from today. I hope everyone is well. Will post more pics as the progress continuesKind regards Jon Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 10m 16d Gender: Male Posted 15/09/13 10:09 PM Author Share Posted 15/09/13 10:09 PM Well I bolted the GTX in place and refilled the coolant. It started dripping out the back of the water pump, the o ring looks a bit old and flat!! LOL. Must of just bumped it enough to cause a slight leak. Will get a new o ring from Ford today and start fitting up the exhaust tonight. Was going to build my own system but got hold of a 4" S/S Xforce for a good price. It would be hard to build one for the same cost.Will post up some more pics soonKindest regards Jon Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 29d Gender: Male Location: Adelaide Posted 15/09/13 10:12 PM Share Posted 15/09/13 10:12 PM Good stuff jon Link to comment Share on other sites More sharing options...
Pixy Angel Expert Donating Members 9,132 Member For: 19y 9m 2d Gender: Male Location: North Jamberoo, NSW Posted 15/09/13 10:31 PM Share Posted 15/09/13 10:31 PM great stuff jon make sure you show us the finishing product look good Link to comment Share on other sites More sharing options...
wagnman Member 567 Member For: 15y 5m 8d Posted 16/09/13 04:26 AM Share Posted 16/09/13 04:26 AM Ingesting turbo you have gone for. Is it the same size as the std g6 one but better flowing/bearings/wastegate etc etc? Will this out perform the std one above the usual 5000rpm drop off point? Cheers Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 10d Posted 16/09/13 05:03 AM Share Posted 16/09/13 05:03 AM From what I've read gtx3576 is good for about 380rwkw on 98 and over 400 on the corn juice. Still got that punch down low but gives it a bit more up top over its little brotherNice build Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 9d Gender: Male Location: Vic Posted 16/09/13 05:58 AM Share Posted 16/09/13 05:58 AM 380 on 98 might be a bit of a reach. Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 10m 16d Gender: Male Posted 16/09/13 10:10 AM Author Share Posted 16/09/13 10:10 AM Hey guys, well I fitted the o ring tonight and bolted the 4" dump on. That damn o ring! lol. Ford has been using that idea for a long time hey!Yeah I was tossing between the 82 and 76 but went the 76 path. I love the quick spool. Making the transition to E85 at same time as all this too. Would really like to see 400rwkw from the little snail on the alcohol. Would be real happy to run a 10.999999et with the 76 before I go the high mount route later down the track. Will push it until I do LOL. Hopefully will finish bolting the exhaust up after work this week and will start fabbing the driver side intake. Going to run an intank 400lph Walbro with modded basket, hopefully should be all good. Will find out if it throws a leg and piston from massive lean out! lamo Will post some more pics later in week once I have done some more. I hope everyone is well . That new cooler will be some work, not much room for something that big. Anyway, will update the build again soonKind regards Jon Link to comment Share on other sites More sharing options...
old_mate Member 767 Member For: 18y 9m 16d Gender: Male Location: Brisbane Posted 16/09/13 11:34 AM Share Posted 16/09/13 11:34 AM Yes that o ring can be a pain in the backside. Fg ran 10.86 on E85 at WSID recently, you get this thing to hook up and you should go fast still Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now