Stigmata Donating Members 235 Member For: 11y 10m 9d Gender: Male Posted 27/08/13 10:33 AM Author Share Posted 27/08/13 10:33 AM Hey everyoneMy apologies for not posting in a while, had some bad ass health probs suddenly happen. Anyway to cut a long story short had a minor stroke and docs found a hole in my heart as the cause, awesome. Only turned 40 in Jan. Oh wellSo the G6 is off the road finally and work is starting on her again. I have the GTX76 in my possession and have started pulling her to bits. Just waiting on a cooler core to rock in from overseas so I can build a bigger unit and redo the piping in 3". Will have a PWR unit and polished 2.5" piping up for sale if any peeps are interested. Hasn't been on there long. Also trying to track down some stainless 4" mufflers and not having much luck, might also build my own mufflers.Will post pics up as I go, hope everyone is well Kind regards Jon Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 22d Gender: Male Location: Adelaide Posted 27/08/13 10:40 AM Share Posted 27/08/13 10:40 AM Jon mate no good to hear about the old ticker, but hope your on the mend Send me a pm when and if u want the pwr unit gone Link to comment Share on other sites More sharing options...
BenDoCo I'm getten too old for this s**t Bronze Donating Members 4,509 Member For: 11y 7m 15d Gender: Male Location: A big bridge over a river in South Australia Posted 27/08/13 11:37 AM Share Posted 27/08/13 11:37 AM ^^^whs - except for wanting the cooler bit. Link to comment Share on other sites More sharing options...
Pixy Angel Expert Donating Members 9,132 Member For: 19y 8m 26d Gender: Male Location: North Jamberoo, NSW Posted 27/08/13 11:38 AM Share Posted 27/08/13 11:38 AM As long as you doing well now jon no one gives a about the build, it can wait. A 100% Jon is what the family needs Take care mate Link to comment Share on other sites More sharing options...
Racerx Member 111 Member For: 16y 1m 20d Gender: Male Location: Perth Posted 31/08/13 01:25 AM Share Posted 31/08/13 01:25 AM Look after yourself Jon Link to comment Share on other sites More sharing options...
Slymeat Team Kickass Donating Members 1,926 Member For: 20y 9m 26d Gender: Male Location: Albion Park, NSW Posted 31/08/13 02:27 AM Share Posted 31/08/13 02:27 AM Twin 2 3/4 pipes will flow more then a single 4" and have less drone, also easier to find mufflers. I am tempted to drop my 4" for twin 2 3/4's after doing some research. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 5m 26d Gender: Male Location: @ my laptop Posted 31/08/13 02:37 AM Share Posted 31/08/13 02:37 AM don't think I've seen a twin 2.75" system 1 Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 10m 9d Gender: Male Posted 31/08/13 11:47 AM Author Share Posted 31/08/13 11:47 AM Yeah if I was going twin I would do twin 3. But im a sucka for single systems. Even on my ls1's I used to run single systems. Kinda funny, made some big power through single 3.5 but with external gate n screamer. Kind regards Jon Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 5m 26d Gender: Male Location: @ my laptop Posted 31/08/13 01:34 PM Share Posted 31/08/13 01:34 PM if using external with screamer and wastegate is actually open under boost then exhaust size is not quite as critical, just harder to get an accurate tune Link to comment Share on other sites More sharing options...
Slymeat Team Kickass Donating Members 1,926 Member For: 20y 9m 26d Gender: Male Location: Albion Park, NSW Posted 01/09/13 11:46 PM Share Posted 01/09/13 11:46 PM A twin system would be much easier to silence at lower speeds, I said twin 2.75 because after doing some research I noticed it would flow a little more than a 4 inch system while remaining alot quieter and twin 2.5 would flow less than a 4 inch system. Dont know if anyone makes it but it seems a sensible size. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now