Stigmata Donating Members 235 Member For: 11y 11m 11d Gender: Male Posted 29/03/13 09:17 AM Author Share Posted 29/03/13 09:17 AM Hi JimI will let you know how this GTX76 goes. Im a bit perplexed about the 76 vs 82 aswell. I will have to have another chat with Bill at ATS about the GTX snails. One thing I am concerned about with the garett is the small diameter turbine shaft, probably why you see so many 35's with the turbine wheel fallen off!! I hope the GTX has a larger shaft, as hanging a 700+hp compressor wheel off the same 35 shaft wouldnt be good? Hopefully the GTX is upgraded?The VL was and still is a great car. A freind of mine has a real nice Calais with stroked LS engine big cam etc, its a very tough ride. I seem to be only one of a couple of us out of all my mates who went down the turbo route after playing with V8's in the early days. Everyone else is still into the big cube 8's which are tough as with a few of them running 550+ cube engines plus boost.Im hearing you, I miss my XY 351 fairmont, wish I still had that, it would be worth a pretty penny now!I should spend my time and money on building a time machine instead!! Hmmmmm, I could go back to a time when my wife was still human! LOLKind regards Jon 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 24d Gender: Male Location: Adelaide Posted 29/03/13 09:46 AM Share Posted 29/03/13 09:46 AM Just incase your intrested julian writes for zoom and works at autospeed so still kicking around !!Go the 76 as its had a few good responses so far Fairly sure its reeled off 400+ rwkw at a touch over 25psi 1 Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m 10d Gender: Male Posted 29/03/13 09:55 AM Share Posted 29/03/13 09:55 AM is that 25psi in the mid jet.. :sungum: Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 24d Gender: Male Location: Adelaide Posted 29/03/13 09:58 AM Share Posted 29/03/13 09:58 AM May of been 27psi it was trav199 that first really pushed one on his G6ET 1 Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m 10d Gender: Male Posted 29/03/13 10:50 AM Share Posted 29/03/13 10:50 AM yeah. they r marsters of 20+psi in the mid up there jet.. they love it.. lol Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 4m 6d Posted 29/03/13 11:33 AM Share Posted 29/03/13 11:33 AM Just incase your intrested julian writes for zoom and works at autospeed so still kicking around !!Go the 76 as its had a few good responses so farFairly sure its reeled off 400+ rwkw at a touch over 25psiYeah I thought he was still around.. I remember reading one of his articles but I couldnt remember where..Gee.. 25 !! Not sure I wanna push that much air..and to be honest 400 isnt really my goal. Maybe a solid 370 with a strong bottom end and mid.Jon do it soon mate.. Im itching to make a move.. 1 Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 16y 17d Gender: Male Location: CQ Posted 29/03/13 09:24 PM Share Posted 29/03/13 09:24 PM Yea it was trav199 in the 400+ section I think, went just over 400kw but I think it comfortably made 370ish, 400 was leaning on it a bit hard IMO 1 Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 11m 11d Gender: Male Posted 29/03/13 09:54 PM Author Share Posted 29/03/13 09:54 PM Hi GuysThanks for the info and advice. Definately thinking the 76, I can always pull it off and fit a 82 later down the track if I want more. Which I probably will.LOL Tried doing a bit of reading on here last night about them. I love bigger snails with a bit of lag follow by a massive rush. But I am also loving the strong low and mid range punch of the 76, it just makes for a real nice streeter. I do miss what I could have up top with the 82 but hopefully the GTX76 fills that void for me. At the moment I am much happier with low and mid range punch than top end, which will probably change LOLFirst things first though MUST DO TAIL SHAFT!!!Its something I keep overlooking cause it hasnt failed yet, be kinda nice if someone did a change over shaft instead of a rework yours arrangement.Will be calling ATS on Tuesday about the GTX KInd regards Jon 1 Link to comment Share on other sites More sharing options...
Stigmata Donating Members 235 Member For: 11y 11m 11d Gender: Male Posted 07/04/13 09:58 AM Author Share Posted 07/04/13 09:58 AM Hi all Just a quick update on the G6ET. After work on saturday I made a new intake elbow as the OEM plastic unit looks like a dog turd. I have also heard stories of them blowing of and putting nice dents in bonnets? I noticed when I removed it that the raised bead isnt very large, not nice above 1 bar. I made a new unit from a 3" alloy donut with a 10mm piece of flat for the map sensor. Didnt take long at all. I will have to upgrade my cold side piping to 3" now!!haha I have attached some pics Got my ID1000 injectors on Thursday and will begin the battery relocation and drivers side air box this weekend coming. The 3.5" exhaust the weekend after that along with a 12psi W/G can. Its then back of to the dyno to see what I can squeeze out of the stock 35/76. Im not expecting much more but would think it should manage 330rwkw with better mid range due to the exhaust, shorter inatke and 12psi can. Hopefully it will hold 17psi rather than dropping off to 14. Take care all Kind regards Jon 2 Link to comment Share on other sites More sharing options...
Seaton Donating Members 537 Member For: 12y 3m 27d Gender: Male Location: Sydney Posted 07/04/13 10:31 AM Share Posted 07/04/13 10:31 AM Very nice, Top welding skills too... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now