4to6 Inactive Members 1 Member For: 11y 10m 15d Posted 22/02/13 06:54 AM Share Posted 22/02/13 06:54 AM Any result on this problem - I have exactly the same, have replaced leads, coils and plugs. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 5m 18d Gender: Male Location: @ my laptop Posted 22/02/13 07:42 AM Share Posted 22/02/13 07:42 AM leads?? Link to comment Share on other sites More sharing options...
heathb New Member 19 Member For: 11y 10m 6d Gender: Male Posted 23/02/13 03:08 AM Author Share Posted 23/02/13 03:08 AM no result as of yet.. still looking into it. Link to comment Share on other sites More sharing options...
trbo 6 Member 230 Member For: 20y 8m 12d Gender: Male Posted 25/02/13 02:36 AM Share Posted 25/02/13 02:36 AM I am having the same issue. My car has new coils and plugs. Did a test run with no air filter and no change.I have a new a1000 pump and custom surge so doubt it's the pump, unless the in tank is stuffed, but not sure how it would cause this issue. It's going back to the tuner next week to have a look. Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 15y 11m 6d Gender: Male Location: CQ Posted 25/02/13 02:58 AM Share Posted 25/02/13 02:58 AM so its been happening since installing the new pump and surge? if that's the case that's a pretty good indication that its something to do with the problem... Link to comment Share on other sites More sharing options...
trbo 6 Member 230 Member For: 20y 8m 12d Gender: Male Posted 25/02/13 03:27 AM Share Posted 25/02/13 03:27 AM The pump was installed about a month ago and then tuned not long after. The car was running fine up until this week, just in time to stuff up my Powercruise weekend. Link to comment Share on other sites More sharing options...
Stevecoutts Member 3 Member For: 11y 8m 23d Gender: Male Location: Sydney NSW Posted 25/02/13 09:09 AM Share Posted 25/02/13 09:09 AM Hi, I have a BA 2003 XR6T with the same issue, I have replaced fuel filter, coils, plugs, PVC valve, air filter and had the throttle body cleaned with no luck. It still will not go beyond 4000rpm on boost. Any more suggestions on this problem? Link to comment Share on other sites More sharing options...
trbo 6 Member 230 Member For: 20y 8m 12d Gender: Male Posted 28/02/13 01:37 AM Share Posted 28/02/13 01:37 AM Have been thinking about this a bit more. My exhaust has been modified recently and is randomly touching the body in one section. Could this be affecting the knock sensor and have the ecu pull timing? Link to comment Share on other sites More sharing options...
heathb New Member 19 Member For: 11y 10m 6d Gender: Male Posted 03/03/13 12:50 AM Author Share Posted 03/03/13 12:50 AM Ok the problem is fixed... strangely enough it was to do with the throttle body. I took it off and gave it full clean, noticed that the bolts were a little on the loose side, also cleaned the plugs with WD40 then blew them out with the air compressor. took off the TPS and also cleaned in there. put her all back together and made sure all the bolts and connections were done up properly and now she boosts right through all gears.such an easy fix that didn't cost a thing and only took about an hour of my time. Link to comment Share on other sites More sharing options...
freeze_dk I am dissatisfied with my current employment situation Donating Members 8,610 Member For: 18y 1m 17d Gender: Male Posted 03/03/13 07:21 AM Share Posted 03/03/13 07:21 AM leads??Yeah. The ones that run to the dizzy 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now