JonesyFX Member 26 Member For: 12y 10m 5d Gender: Male Location: Newcastle, NSW Posted 05/02/13 10:46 AM Share Posted 05/02/13 10:46 AM I think ive isolated an anoying rattle (only audible from inside, on slightly bumpy roards) to loose pads in the calipers. The noise doesnt occur when on brakes. You can move the pads by hand. I had a mate do this while I sat inside and it sounds like this is the culprit. So what can I do? I know there are no shims, so I assume that's a start. What aboout the clips? where can I get new ones, or can I bend them to give more tension etc Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 6d Gender: Male Location: Perth Posted 05/02/13 11:10 AM Share Posted 05/02/13 11:10 AM http://www.horsepowerfreaks.com/partdetails/CRC/Brakes/Brake_Anti_Squeal_Shims/Disc_Brake_Quiet/6765 Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 4m 2d Gender: Male Posted 05/02/13 11:11 AM Share Posted 05/02/13 11:11 AM Get some anti squeal (orange bottle) apply it to back of brake pads and let it set, it glues the pads to the pistons, Link to comment Share on other sites More sharing options...
boost69 Donating Members 737 Member For: 19y 6m 10d Posted 05/02/13 10:28 PM Share Posted 05/02/13 10:28 PM Yeah I have the shims on the FG and there is no rattle...they stick to the pad backing plate, so its easy to forget to put them on the new pad, and just throw them out with the old pad.Im not sure where you would get them though, but this will solve your rattling issue. Link to comment Share on other sites More sharing options...
JonesyFX Member 26 Member For: 12y 10m 5d Gender: Male Location: Newcastle, NSW Posted 06/02/13 01:33 AM Author Share Posted 06/02/13 01:33 AM Thanks fellas, going to try the orange anti-squeal. will let you know if this resolves the issue. Link to comment Share on other sites More sharing options...
JonesyFX Member 26 Member For: 12y 10m 5d Gender: Male Location: Newcastle, NSW Posted 11/02/13 10:42 PM Author Share Posted 11/02/13 10:42 PM Seems to have done the trick, thanks fellas!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now