Jump to content

Ba/f With Fg Turbo Plenum


Recommended Posts

  • Donating Members
  • Member For: 13y 5m 28d
  • Gender: Male

I went from stock plenum and the big rapid cooler!

Joe commanded 0 boost but minimum was 18psi once run up on the dyno!

I then Fitted the pro street cooler (smaller) and a plazmaman plenum! Commanded 0 boost minimum was now 13psi! Also power before was maximum 342RWKW at 18psi new cooler & plenum 385RWKW 16psi MORE POWER LESS BOOST

Tell me it was all the cooler!!!!!

  • Like 1
Link to comment
Share on other sites

  • RNS10S
  • Donating Members
  • Member For: 18y 5m 22d
  • Gender: Male

Stock plenum is an absolute piece of garbage...I hate it with a passion lol.

400+kw and its garbage?

I understand that a PW /Plaz /Niz may be better but I wouldn't say the stock one is garbage.

I asked my tuner a while ago as I was ready to buy a Niz plenum and rocker cover and he advised me not to waste my money, so I didn't.

Link to comment
Share on other sites

  • RNS10S
  • Donating Members
  • Member For: 18y 5m 22d
  • Gender: Male

I went from stock plenum and the big rapid cooler!

Joe commanded 0 boost but minimum was 18psi once run up on the dyno!

I then Fitted the pro street cooler (smaller) and a plazmaman plenum! Commanded 0 boost minimum was now 13psi! Also power before was maximum 342RWKW at 18psi new cooler & plenum 385RWKW 16psi MORE POWER LESS BOOST

Tell me it was all the cooler!!!!!

I will tell you it was both.

I don't believe it would have dropped 5psi and made more power by just changing the plenum.

Was the tune changed?

Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 5m 28d
  • Gender: Male

My point is it would not make more power then that! Even with 18psi! I aggree it would have been a combination of the two changes. But being such a huge difference the plenum had to of helped.

Link to comment
Share on other sites

  • Member
  • Member For: 13y 5m 16d
  • Gender: Male
  • Location: Werribee,Melbourne, Australia

im looking for the 400+ I just put a almost new motor in my ba ... FG MK2 F6 bottom end with my recoed BA head with BA cams

iv done everything

the only things left on the list is a plenum and hot side pipeing..

at the moment im running 334RWKW @629.2NM @15PSI (with old motor)

Link to comment
Share on other sites

  • RNS10S
  • Donating Members
  • Member For: 18y 5m 22d
  • Gender: Male

My point is it would not make more power then that! Even with 18psi! I aggree it would have been a combination of the two changes. But being such a huge difference the plenum had to of helped.

Jason,

Your car for some reason has always made less power than others with similar mods, I don't know why.

In the E85 thread your Autotech tune had you at 344 @ 15psi with a standard GT3540, and with a standard manifold.

Link to comment
Share on other sites

  • Silver Donating Members
  • Member For: 19y 6m 30d
  • Gender: Male
  • Location: OZ

400+kw and its garbage?

I understand that a PW /Plaz /Niz may be better but I wouldn't say the stock one is garbage.

I asked my tuner a while ago as I was ready to buy a Niz plenum and rocker cover and he advised me not to waste my money, so I didn't.

Yes. The garbage can is where half of mine resides!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'