rockafellqeinstien Member 325 Member For: 16y 3m 13d Posted 22/01/13 01:48 AM Share Posted 22/01/13 01:48 AM So I am getting code p0236 - boost sensor circuit out of range.I was thinking that it was probably just a faulty sensor as it occurs after I reach about 18 psi or more(have a gtx set up) and that it wasnt reading the high PSI correctly.So I ordered a new one thinking that might fix it (I havnt picked it up or paid for it yet).but now I discover on bosch's web page that the FG map sensor is part number 0 261 230 020 which max's out at 115 kpa (or 16 psi at 4.65 volt). I guess theoretically you might get to use the extra .35 volt (total 5 volt) but even then that would only bring you up to just over 17 psi.So what happens if you go over this amount - does the maf sensor take over?I am now thinking that the reason my car throws the p0236 code is it max's out the Map sensor range. Seeing that there are alot of cars running more than 17 psi, do/are tuners just able to stop that code from registering?when mine throws the code, the car obviously goes into some special limpy mode and surges/pulses on light throttle. if I clear it it goes back to normal straight away.mucho grassy arse for any advice Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 13y 9m 17d Posted 22/01/13 06:54 AM Share Posted 22/01/13 06:54 AM Your overboosting Link to comment Share on other sites More sharing options...
CHLAXN Donating Members 932 Member For: 16y 5m 14d Gender: Male Location: north QLD Posted 22/01/13 07:47 AM Share Posted 22/01/13 07:47 AM I running 24psi stock map sensor no dramas. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 5d Gender: Male Location: Adelaide Posted 22/01/13 08:05 AM Share Posted 22/01/13 08:05 AM Iam running 22psi no codes either Link to comment Share on other sites More sharing options...
boosted barra New Member 10 Member For: 8y 5m 1d Posted 28/07/16 10:07 AM Share Posted 28/07/16 10:07 AM I've been having the exact same problem when we were tuning on the dyno. Any ideas to get around the problem and to fix it? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 5d Gender: Male Location: Adelaide Posted 28/07/16 10:38 AM Share Posted 28/07/16 10:38 AM I take it you're a newb to tuning the turbo falcon then ? Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 9d Gender: Male Location: Perth Posted 28/07/16 10:43 AM Share Posted 28/07/16 10:43 AM On 1/22/2013 at 4:05 PM, JETURBO said: Iam running 22psi no codes either Not anymore. Your boost = 0. Hurry up on VF boost........... Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 5d Gender: Male Location: Adelaide Posted 28/07/16 11:09 AM Share Posted 28/07/16 11:09 AM As I've always said, it's going to happen but I have taken a big liking to the new R8 LSA Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 9d Gender: Male Location: Perth Posted 28/07/16 11:22 AM Share Posted 28/07/16 11:22 AM Nice, So is it trade in time. A mate of mine went halves in a crate LSA, he kept the blower and extras and the other guy got the engine. Blower for 6K, RTR. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now