JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 26d Gender: Male Location: Adelaide Posted 19/04/13 02:03 AM Share Posted 19/04/13 02:03 AM henz has greasy balls?This was the issue ( its a joke hens rubs his junk on everything ) Link to comment Share on other sites More sharing options...
FPVFGS Member 359 Member For: 12y 6m 24d Gender: Male Location: Mornington Posted 19/04/13 03:38 AM Share Posted 19/04/13 03:38 AM .. Paul I'm going to be very truthful. The installs have all been done by Mick at pitlane . I believe very strongly that there workmanship is 100% and they did not contaiminate that clutch . I have not bagged out malwood at any stage . Only voiced my honest opinion. This contamination I am very suspicious about , I have photos when I pulled the clutch out and I packed it . There was no trace of oil nor grease on any part of the clutch or in the gear box and motor. When dealing with you over the phone Paul it was good customer service . but when mal called me and charged me $800 because of the change of the clutch plates etc . I will say im f*cking pissed off. so much for warranty . So to be fair I will never recomend mal wood clutches nor will I bag them out . I still regard Mick and pitlane in high regard and recomend them . Sent from my HTC One XL using Tapatalk 2 1 Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 15y 11m 18d Gender: Male Location: CQ Posted 19/04/13 05:30 AM Share Posted 19/04/13 05:30 AM ^^^ and that's fair enough... I personally was more then pleased with my mal wood gear and I would definitely recomend them. 1 Link to comment Share on other sites More sharing options...
Rosie Member 361 Member For: 17y 7m 18d Posted 19/04/13 08:32 PM Share Posted 19/04/13 08:32 PM I wouldn't hesitate to recommend Mal Wood and his product Link to comment Share on other sites More sharing options...
FPVFGS Member 359 Member For: 12y 6m 24d Gender: Male Location: Mornington Posted 20/04/13 01:30 AM Share Posted 20/04/13 01:30 AM Rosie that's fine .. but have you read this whole topic ? Every one has there own opinion. Which is fine but this is the first time I have seen you post .Sent from my HTC One XL using Tapatalk 2 Link to comment Share on other sites More sharing options...
Rosie Member 361 Member For: 17y 7m 18d Posted 20/04/13 03:49 AM Share Posted 20/04/13 03:49 AM Rosie that's fine .. but have you read this whole topic ? Every one has there own opinion. Which is fine but this is the first time I have seen you post .Sent from my HTC One XL using Tapatalk 2All good!I had '14' Clutches in my Car until I went to Mal Wood- All 'big Horsepower' Clutches.I have been using his 'original' Option 5 Twin Plate for the last 7 YearsI recently had Mal refurbish my Twin Plate after 88,000kmThe previous one did over 66,000kmIt's a BA, (Bought new in November 2002) with a genuine 450 at the Treads and I drive it most Days and take it to the Track at least once a Month.Bathurst, Phillip Isle, Eastern Creek, Wakefield.....Mal toughened the Six Speed when I dropped it in and supplied the Chrome Moloy Tailshaft, Shortshift, Tranny Cooler and Twin Plate.I never have to look at any of this gear Link to comment Share on other sites More sharing options...
FPVFGS Member 359 Member For: 12y 6m 24d Gender: Male Location: Mornington Posted 20/04/13 05:49 AM Share Posted 20/04/13 05:49 AM Have u ever raced your car Sent from my HTC One XL using Tapatalk 2 Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 9m 19d Gender: Male Location: SW Sydney Posted 20/04/13 05:59 AM Share Posted 20/04/13 05:59 AM Rosie's car was one of the first mid 11 sec manuals back in the day, sorry to jump in, but he has been around the block a fair few more times than most of us here... Link to comment Share on other sites More sharing options...
FPVFGS Member 359 Member For: 12y 6m 24d Gender: Male Location: Mornington Posted 20/04/13 06:04 AM Share Posted 20/04/13 06:04 AM I'm not having kind of go its more off topic I wanted to know how it went and 11s are goodSent from my HTC One XL using Tapatalk 2 Link to comment Share on other sites More sharing options...
Rosie Member 361 Member For: 17y 7m 18d Posted 20/04/13 06:13 AM Share Posted 20/04/13 06:13 AM Have u ever raced your carSent from my HTC One XL using Tapatalk 2Only in Cams run events such as FOSC Bathurst, Eastern Creek and Wakefield, Drive Bathurst 3 times and 3 trips to the Phillip Island 6 Hour Relay.- Plus various other Track events and Drive Days.The Car has been built as a Daily Drive/Track Car.- Although it has now dramatically changed in appearance and 'may' eventually have to become a Trailer Car.* The real Story here, is I use and recommend Mal Wood Products and have never had cause to complain about the Product, or the after Sales Service.- Mal Wood is one of '4' Suppliers only, I use to keep the Car in working order.Years of bad experiences and Buckets of wasted Money finally got me to this position- And 'earlier' Members of this Forum helped a great deal!Mal Wood for DrivelineV-Sport for Brake and Aero fitmentCV Performance for Engine build and TuningHeasman Suspension for Suspension fitment and tuning Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now