STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 13y 11m 27d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 07/03/13 10:56 AM Share Posted 07/03/13 10:56 AM Proppa Link to comment Share on other sites More sharing options...
OED666 Member 129 Member For: 18y 6m 1d Gender: Male Location: Gold Coast, Qld Posted 07/03/13 11:23 AM Share Posted 07/03/13 11:23 AM The spigot bearing was not replaced!!! I can see the grease on the inside of the wheel.The baseplate is not straight, same with the flywheel. It's been very hot for this to happen.Did the clutch shudder?Also, why was the ring gear welded? They just need heating up and fitting on the wheel. Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 13y 11m 27d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 07/03/13 11:44 AM Share Posted 07/03/13 11:44 AM Well he thought he replaced it by taking the old one out and putting the new one in. But obviously he is mistaken because you said so. Ring gear is stich welded because it can be. Link to comment Share on other sites More sharing options...
OED666 Member 129 Member For: 18y 6m 1d Gender: Male Location: Gold Coast, Qld Posted 07/03/13 01:17 PM Share Posted 07/03/13 01:17 PM Ben, are you sure your mechanic replaced the spiggot bearing with the supplied item, many do not as they can be a bit of work to removeMick, yes im 100% posative he replaced spiggot bearing. Little bit of oxy and it slipped straight off. When you were offering advice on install (as you do) you mentioned this probably 5+ times so I definately made sure it happened. Not wanting to be smug, but I take some pleasure in reading this again. Either the original bearing was not replaced, or replaced with a factory item as opposed to the one supplied.I'm not saying this is the whole reason for the issue, but it's a major contributing factor. It's the sole reason why instructions are provided, but why do so many mechanics think they do not need them? Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 13y 11m 27d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 07/03/13 06:31 PM Share Posted 07/03/13 06:31 PM My mistake. I was thinking of the ring gear when mentioning using oxi. But clutch didnt fail because I misspoke.So secret ingredient to the success of my clutch is a spigot bearing that's had all the lubrication washed out of it and run dry?I do remember now he replaced the one supplied because it felt like it was about to seize when turned with your fingers. He showed me and I said get a new one.I deal with bearings every day at work and would make that call everytime when putting something "brand new" together. And im not even a mechanic.Maybe in the instructions you need to tell the mechanic why they need to use your bearing that feels half seized. Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 13y 11m 27d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 07/03/13 07:00 PM Share Posted 07/03/13 07:00 PM But now, Im willing to accept that's part contributed to the clutch failing. I dont see how, but they are your instructions so yer. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 23d Gender: Male Location: Adelaide Posted 07/03/13 08:24 PM Share Posted 07/03/13 08:24 PM Oh no spaghettiooooo Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 2m 2d Gender: Male Posted 07/03/13 08:41 PM Author Share Posted 07/03/13 08:41 PM Jet fark off as you cannot post in here due to not having a manual.. Auto driving poof 1 Link to comment Share on other sites More sharing options...
FPVFGS Member 359 Member For: 12y 7m 23d Gender: Male Location: Mornington Posted 07/03/13 09:02 PM Share Posted 07/03/13 09:02 PM My clutch should be out this weekend . I've had nothing but trouble at work last few weeks so my car is just pushed into the back corner .. :-(Sent from my HTC One XL using Tapatalk 2 Link to comment Share on other sites More sharing options...
Ace blind leading the blind Member 3,657 Member For: 16y 3m 14d Gender: Male Location: Mt Alford, Queensland Posted 07/03/13 09:09 PM Share Posted 07/03/13 09:09 PM (edited) Staino that clutch looks horribly wrong. I know you are anti mal wood but if I was you I'd be sending that somewhere to get check for what was wrong. It might just be the photos but to me looks like either something is all over the the clutch or it was horribly out of alignment somehow. Edited 07/03/13 09:09 PM by Ace Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now