Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 8m 29d Gender: Male Location: Sydney Posted 21/01/13 01:10 AM Share Posted 21/01/13 01:10 AM Nah just buy a GTX3582r from Joe."." Link to comment Share on other sites More sharing options...
relentless xr6 Member 363 Member For: 13y 11m 5d Gender: Male Location: Sydney Posted 21/01/13 01:34 AM Share Posted 21/01/13 01:34 AM Nws mate gtx requires a little bit extra to fit it up but is a very good option Link to comment Share on other sites More sharing options...
air555 Member 15 Member For: 12y 3m 5d Posted 21/01/13 02:10 AM Author Share Posted 21/01/13 02:10 AM What are benefits of gtx? Price difference? Mods required? Engines done 200000k's, so planning on just running 8psi on it with original turbo at this stage, don't want to push it too hard. Link to comment Share on other sites More sharing options...
unclewal Donating Members 583 Member For: 14y 1m 20d Posted 21/01/13 03:22 AM Share Posted 21/01/13 03:22 AM Stick with the rebuild, if you dont want to push the engine the GTX at 8psi may flow slightly better but you will not get good ROI unless you plan to rebuild your motor down the track. Link to comment Share on other sites More sharing options...
relentless xr6 Member 363 Member For: 13y 11m 5d Gender: Male Location: Sydney Posted 21/01/13 03:50 AM Share Posted 21/01/13 03:50 AM yeh gtx works best at 17psi but point being they're heaps of options out there. Link to comment Share on other sites More sharing options...
air555 Member 15 Member For: 12y 3m 5d Posted 21/01/13 05:01 AM Author Share Posted 21/01/13 05:01 AM Yeah I'll be happy with the low cash option that see's me back over 200kw for time being. Link to comment Share on other sites More sharing options...
Sundeep Member 72 Member For: 15y 7m 25d Gender: Male Location: Mooroolbark, VIC Posted 21/01/13 05:58 AM Share Posted 21/01/13 05:58 AM (edited) FWIW I installed a aftermarket CHRA in to a genuine housing myself, but on a mate's standard BF 270T, and it worked perfectly from first shot. I have replaced comp wheels etc. without balancing and they have also worked well. Mates have done a few thousand KM in those cars without issue.Another guy I know has been running 20PSI through a non-gen CHRA for a while with no problems.They are a bit under-rated I reckon. Some people on here have probably bought cars running non-genuine core's and don't even realise it.Non genuine CHRA is about $600.Second-hand genuine turbos are about $700-900 (what I have sold them for in the past) with about 100,000 on them.Fitting by a mechanic is over $400 in most cases, due to the way that they're installed and poor condition bolts in the older ones.There's no easy or cost effective way around it, but if you do your research you can get away with it cheaply. You said the car has a few Kay's on her, not like it's a mint condition BF R-Spec, just take the easy way out and she'll be running mint again in no time.I don't have any turbo's laying around at the moment that I could sell you otherwise I would Edited 21/01/13 06:07 AM by Sundeep Link to comment Share on other sites More sharing options...
air555 Member 15 Member For: 12y 3m 5d Posted 21/01/13 07:02 AM Author Share Posted 21/01/13 07:02 AM Was thinking of non genuine chra, can get a Chinese one for around $350, has not been balanced though. Anyway will take my turbo to pro charge as Ben there sounds like a good bloke and the price is really good from what he has told me. As far as install goes, I will be doing it with a mate, we have taken the turbo off once before to replace actuator, was a bitch of a job, particularly because of a pita bracket under the turbo, however removed that last time so should be slightly easier. Link to comment Share on other sites More sharing options...
Kebab New Member 5 Member For: 12y 3m 10d Posted 22/01/13 06:57 AM Share Posted 22/01/13 06:57 AM Im about due for a new turbo as well. What is needed to change the standard turbo on a BA to a GTX3582r?I have found plenty for sale, most without housing. What size turbine housing would I need? Link to comment Share on other sites More sharing options...
jas98 Member 1,030 Member For: 12y 3m 17d Gender: Male Location: Maryborough Qld Posted 22/01/13 03:27 PM Share Posted 22/01/13 03:27 PM Was thinking of non genuine chra, can get a Chinese one for around $350, has not been balanced though. Anyway will take my turbo to pro charge as Ben there sounds like a good bloke and the price is really good from what he has told me. As far as install goes, I will be doing it with a mate, we have taken the turbo off once before to replace actuator, was a bitch of a job, particularly because of a pita bracket under the turbo, however removed that last time so should be slightly easier.got a link? do they need to be balanced? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now