ratter Member 6,793 Member For: 18y 6m 1d Gender: Male Location: @ my laptop Posted 23/01/13 10:25 PM Share Posted 23/01/13 10:25 PM The power run was the 6th run, so it was starting to get heat soak. In relation to your other questions, you would have to ask Realdyno. But I have complete faith in these guys, and Pete who tuned it, has been tuning for over 30 years. And his father before him also had a dyno, so I'm guessing experience may play a role.Cheers isn't that IT temp recorded from a probe sensor on a DD? if so it should be placed near or in the air intake and would not be affected by heat soak as the dyno cooling fans should keep the external temp under control, unless something is heating up your air box.The best guide for IAT is through the obd2, that way you can see what the ecu is seeing inside the manifold.It's good you are happy with the final job, that is the main aspect, Realdyno have done their job well Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 4m 8d Gender: Not Telling Posted 23/01/13 11:02 PM Author Share Posted 23/01/13 11:02 PM Yes the probe was placed in the airbox (Pete actually highlighted the IT, and said there may be some conjecture, but it is what it is). I'm wondering whether placing my rocker breather oulet in the airbox could be the problem here.And yes Mick very happy. I can't stress enough the importance of using good tuner's such as yourself. As you know I went down the generic tune road, (for those out there considering it) and as tempting as it may seem DO NOT DO THIS. As the risks far outweigh the benefit.Just a side note, what I found interesting was that the run after the 396 was a 395. I only lost 1 hp with the cooler. This may possibly be a result of the other mods I have done. So what had been done may not of produced a lot of addition hp, but it may infact have provided more consistency. And with a proper cooler, I might see some better results down the track.Cheers Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 13y 10m 9d Posted 23/01/13 11:06 PM Share Posted 23/01/13 11:06 PM You'd be surprised at how little difference to power 10.5-12.5 afr makes. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 1d Gender: Male Location: @ my laptop Posted 23/01/13 11:09 PM Share Posted 23/01/13 11:09 PM the rocker cover breather going into the air box will be heating the air a little to affect that temp probe reading and warm the air a little more before the turbo. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 1d Gender: Male Location: @ my laptop Posted 23/01/13 11:10 PM Share Posted 23/01/13 11:10 PM the richer it is run will result in lower power output, but able to handle more spark advance to a certain point Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 8d Gender: Male Location: Vic Posted 24/01/13 01:56 AM Share Posted 24/01/13 01:56 AM <blockquote class='ipsBlockquote'data-author="Impellor" data-cid="1353803" data-time="1358949940"><p>Unfortunately yes, how long do you reckon it will last. Cheers</p></blockquote>Years. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 1d Gender: Male Location: @ my laptop Posted 24/01/13 03:04 AM Share Posted 24/01/13 03:04 AM It's not as simple as rich = safe and lean = unsafe.many people need to pay attention to this post 1 Link to comment Share on other sites More sharing options...
Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 3m 27d Gender: Male Location: South West QLD Posted 24/01/13 03:08 AM Share Posted 24/01/13 03:08 AM I ignore all sensible posts on this forum..Haven't you learnt that yet ratter! 2 Link to comment Share on other sites More sharing options...
Mrs Jeturbo Bob the Freaking Builder Donating Members 10,813 Member For: 15y 2m 15d Gender: Female Location: SA Posted 24/01/13 03:16 AM Share Posted 24/01/13 03:16 AM ye ratter your too intelligent for this forum lol 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 5d Gender: Male Location: Perth Posted 24/01/13 03:17 AM Share Posted 24/01/13 03:17 AM many people need to pay attention to this postPing still = POWA tho right? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now