Jump to content

Help! New 19's Wont Fit On The Front.I Have Pictures


Chemarrie

Recommended Posts

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 5m 29d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

yes et will denote offset.

look up honda (whatever model) offset on google and you should be able to find the offset they require.

only way to fix is hub spacer, but they are illegal (even though plenty run them) but you risk a defect if you do...

Link to comment
Share on other sites

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 5m 29d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

ha ha ha they are 20's...

maybe do some reading up on the wheel threads to increase your understanding of whats what, or search the interwebs for explanations on sizes, load ratings, offsets etc..

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 9m 27d
  • Gender: Male
  • Location: Christchurch, New Zealand

Somewhere on the inside of the rim it will have some stamped numbers. One of these numbers will be the offset, if you can get all the info you can find and post it there will be more help.

As for the CAPA tune that probably is the cause of the idle issue. You should be able to plug it in and return to stock. Has your car got standard injectors?

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 11y 10m 13d
  • Gender: Female
  • Location: Blacktown

Just a note of those Hub spacers how much are they around and does anyone install them?
I was worried that if I put the wheels outside on spacers that I would hit the inside kit when I turn the wheels.
I am also worried that I will need a pretty big spacer to clear that metal thing maybe at least 5 cm is this possible?

Link to comment
Share on other sites

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 5m 29d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

yep I started a thread on the wheels section with details of a hub spacer supplier in the us.

you wont have much clearance at the best of times with 20's (2-3mm is normal). as I said before, find out the offset of the car they came off and see what the difference is between that and +35 (mm). looks like they may be 0 offset, as (guessing) 35mm would do...

Edited by Panda Eyes
  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 11y 10m 13d
  • Gender: Female
  • Location: Blacktown
Somewhere on the inside of the rim it will have some stamped numbers. One of these numbers will be the offset, if you can get all the info you can find and post it there will be more help.

As for the CAPA tune that probably is the cause of the idle issue. You should be able to plug it in and return to stock. Has your car got standard injectors?

Ok so my offset it ET 45 its stamped inside the rims.

Are they really 20's lol wtf I really need to do my research hahaha

Capa tuner I dont think was installed yet the guy brought it for the car to get done for idleing issues but never got it done from what I know.

I dont know where to install the capa tuner does any one have a grid or pic =)

Link to comment
Share on other sites

  • flame magnet
  • Gold Donating Members
  • Member For: 16y 5m 29d
  • Gender: Male
  • Location: adelaide hills- 'race air' central

what width are the rims? (should say on the inside 20 x ??jj)

Edited by Panda Eyes
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'