Show Us Your Lowered Fg! (Sedan + Utes)

[BRA0063]

here is mine

SSSL front and custom stage 6 rear springs still not low and I dont scrape on anything and stock shocks are fine and still rides well" still legal height 10cm lowest point". boy these cars are an ass to get low.

when the springs settle will it lower another cm roughly because then it will be perfect.

[BRA0063]

  On 15/10/2013 at 10:37 AM, BRA0063 said:

here is mine

SSSL front and custom stage 6 rear springs still not low and I dont scrape on anything and stock shocks are fine and still rides well" still legal height 10cm lowest point". boy these cars are an ass to get low.

when the springs settle will it lower another cm roughly because then it will be perfect.

IMG_2203.JPG

REAR MEASUREMENT IS 310 wheel centre to guard im wanting 300. I only scraped on large speed bumps with a wheel to guard measurement of 280 on compressed springs

[naldz006]

  On 15/10/2013 at 10:37 AM, BRA0063 said:

here is mine

SSSL front and custom stage 6 rear springs still not low and I dont scrape on anything and stock shocks are fine and still rides well" still legal height 10cm lowest point". boy these cars are an ass to get low.

when the springs settle will it lower another cm roughly because then it will be perfect.

IMG_2203.JPG

Geez that's low! Looks good, but beware stock shocks will be hating it....they'll be shagged faster than your tyres my bet!!

[BRA0063]

Do you think it will sag another cm when new rear springs settle

And are those rubber spring housings important if I take them out?

Edited 15/10/13 11:06 AM by BRA0063

[10SECN]

  On 12/10/2013 at 1:27 PM, Ford Freak said:

good luck getting the xrs off the transport trucks if they were that low ahahahha

they scrape at stock height

Hsv,s come with blocks of wood jammed between the springs before pre delivery

[BRA0063]

? Anyone

[XtRmn8]

My SSL King spring settled about 5mm max.

Id you are talking about the rear spring rubber saddles, I would not be taking them out.

[Bellato]

Those spring seats? Not sure how "important" they are but it would be effin noisey without them. N 1 cm

Of sag is possible

[LAZY6]

  On 16/10/2013 at 4:39 AM, BRA0063 said:

? Anyone

Leave them in

Get the springs compressed if you want it lower

Or air bags

[TomT]

  On 15/10/2013 at 10:37 AM, BRA0063 said:

here is mine

 

SSSL front and custom stage 6 rear springs still not low and I dont scrape on anything and stock shocks are fine and still rides well" still legal height 10cm lowest point". boy these cars are an ass to get low.

 

when the springs settle will it lower another cm roughly because then it will be perfect.

 

You obviously have a stock exhaust then haha.

I have SSSL rear SSL front with 4" dump and cat into 3.5" cat-back.

Exhaust flange definitely below 100mm lol. Scrapes on heaps.