BRA0063 Member 5 Member For: 12y 6d Posted 15/10/13 10:37 AM Share Posted 15/10/13 10:37 AM here is mineSSSL front and custom stage 6 rear springs still not low and I dont scrape on anything and stock shocks are fine and still rides well" still legal height 10cm lowest point". boy these cars are an ass to get low.when the springs settle will it lower another cm roughly because then it will be perfect. Link to comment Share on other sites More sharing options...
BRA0063 Member 5 Member For: 12y 6d Posted 15/10/13 10:42 AM Share Posted 15/10/13 10:42 AM here is mineSSSL front and custom stage 6 rear springs still not low and I dont scrape on anything and stock shocks are fine and still rides well" still legal height 10cm lowest point". boy these cars are an ass to get low.when the springs settle will it lower another cm roughly because then it will be perfect.IMG_2203.JPGREAR MEASUREMENT IS 310 wheel centre to guard im wanting 300. I only scraped on large speed bumps with a wheel to guard measurement of 280 on compressed springs Link to comment Share on other sites More sharing options...
naldz006 Member 61 Member For: 12y 9m 22d Gender: Male Location: Mallee Posted 15/10/13 10:52 AM Share Posted 15/10/13 10:52 AM here is mineSSSL front and custom stage 6 rear springs still not low and I dont scrape on anything and stock shocks are fine and still rides well" still legal height 10cm lowest point". boy these cars are an ass to get low.when the springs settle will it lower another cm roughly because then it will be perfect.IMG_2203.JPGGeez that's low! Looks good, but beware stock shocks will be hating it....they'll be shagged faster than your tyres my bet!! Link to comment Share on other sites More sharing options...
BRA0063 Member 5 Member For: 12y 6d Posted 15/10/13 11:03 AM Share Posted 15/10/13 11:03 AM (edited) Do you think it will sag another cm when new rear springs settleAnd are those rubber spring housings important if I take them out? Edited 15/10/13 11:06 AM by BRA0063 1 Link to comment Share on other sites More sharing options...
10SECN Member 516 Member For: 11y 8m 1d Gender: Male Location: west hoxton Posted 16/10/13 02:50 AM Share Posted 16/10/13 02:50 AM good luck getting the xrs off the transport trucks if they were that low ahahahhathey scrape at stock heightHsv,s come with blocks of wood jammed between the springs before pre delivery Link to comment Share on other sites More sharing options...
BRA0063 Member 5 Member For: 12y 6d Posted 16/10/13 04:39 AM Share Posted 16/10/13 04:39 AM ? Anyone Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 3m 12d Gender: Male Location: Perth, WA Posted 16/10/13 04:50 AM Share Posted 16/10/13 04:50 AM My SSL King spring settled about 5mm max.Id you are talking about the rear spring rubber saddles, I would not be taking them out. Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 2m 15d Posted 16/10/13 04:51 AM Share Posted 16/10/13 04:51 AM Those spring seats? Not sure how "important" they are but it would be effin noisey without them. N 1 cmOf sag is possible Link to comment Share on other sites More sharing options...
LAZY6 Member 620 Member For: 20y 1m 13d Gender: Male Posted 16/10/13 10:02 AM Share Posted 16/10/13 10:02 AM ? AnyoneLeave them in Get the springs compressed if you want it lowerOr air bags Link to comment Share on other sites More sharing options...
TomT Spooling Member Donating Members 961 Member For: 13y 28d Gender: Male Location: Blue Mountains, NSW Posted 17/10/13 03:43 AM Share Posted 17/10/13 03:43 AM here is mine SSSL front and custom stage 6 rear springs still not low and I dont scrape on anything and stock shocks are fine and still rides well" still legal height 10cm lowest point". boy these cars are an ass to get low. when the springs settle will it lower another cm roughly because then it will be perfect. You obviously have a stock exhaust then haha.I have SSSL rear SSL front with 4" dump and cat into 3.5" cat-back.Exhaust flange definitely below 100mm lol. Scrapes on heaps. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now