trentd Member 5 Member For: 13y 9m 6d Posted 27/02/13 03:37 AM Share Posted 27/02/13 03:37 AM ^^^your car is to high and probably rolls around like a boat if you haven't changed/cut your bump stopsdoesn't handle like a boat, just bouncy.Taking into consideration, the xyz coilovers are a lot shorter then the standard ones, so even when the spring is adjusted high they seem to be touching, I can increase the length of the shock (rebound - correct if wrong), hopefully this might help.Just for info, as it sits now it is still a fair gap above the wheel, I don't want it dragging on the ground I just like a bit of tire tuck. Link to comment Share on other sites More sharing options...
Seaton Donating Members 537 Member For: 12y 2m 12d Gender: Male Location: Sydney Posted 27/02/13 11:00 AM Share Posted 27/02/13 11:00 AM Yep, my SSSL rear needed cut bumps. They are actually close to them on stock springs. Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 1m 17d Gender: Male Location: Perth, WA Posted 28/02/13 03:20 AM Share Posted 28/02/13 03:20 AM Pics below of SSL rear with trimmed bump stops. If they were not trimmed there would be less then 5mm clearance between the bump stop and arm. Link to comment Share on other sites More sharing options...
jimmixr Donating Members 686 Member For: 14y 2m 20d Posted 28/02/13 04:07 AM Share Posted 28/02/13 04:07 AM what wheels are they!!TSW Nurberings 20x10 & 20x8.5 Link to comment Share on other sites More sharing options...
CDR_078 Member 87 Member For: 12y 10m 23d Posted 01/03/13 08:51 AM Share Posted 01/03/13 08:51 AM Pics below of SSL rear with trimmed bump stops. If they were not trimmed there would be less then 5mm clearance between the bump stop and arm.Did you do this yourself mate? How much of a mission is it? Cheers Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 20d Posted 01/03/13 09:04 AM Share Posted 01/03/13 09:04 AM ^^ trimming bump stops or doing the springs?Both easy for the matter lol Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 1m 17d Gender: Male Location: Perth, WA Posted 01/03/13 10:02 AM Share Posted 01/03/13 10:02 AM I cut the bump stops when I was fitting the springs. They pull out easy and you can cut them with a hacksaw or sharp knife.They are easy to get to so you should have no dramas trimming them without having to pull then out. Link to comment Share on other sites More sharing options...
CDR_078 Member 87 Member For: 12y 10m 23d Posted 01/03/13 12:26 PM Share Posted 01/03/13 12:26 PM Thanks mate, I'm keen to chuck a set of SSSLs in the rear just to see how different it looks / rides. If its none to complex I might have a crack myself. Link to comment Share on other sites More sharing options...
EFSIX I Lead Not Follow... Member 1,026 Member For: 12y 6m 20d Gender: Male Location: Westside,Melbourne Posted 01/03/13 12:33 PM Share Posted 01/03/13 12:33 PM so from all that confusion,you have to cut your bump stops to get more low ?? correction..? Link to comment Share on other sites More sharing options...
andreew Member 101 Member For: 12y 7m 2d Gender: Male Location: Melbourne S.E. Posted 01/03/13 11:49 PM Share Posted 01/03/13 11:49 PM I have the Torana King Springs in the rear. Love the height, never had any dramas from police or anything.Haven't lowered the front yet because lazy.. And I don't know what springs to use. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now