Adam Here since the start... Lifetime Members 10,282 Member For: 21y 8m 24d Gender: Male Location: Victoria Posted 22/12/12 11:55 AM Share Posted 22/12/12 11:55 AM Congrats on taking a different route.The talk of "optimum efficiency" followed by the parts you listed is a little confusing to me. That won't be optimum for the car as a package.Over engineering the hardware for the desired result is the way to go IMO. 1 Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 9m 30d Gender: Male Location: Vic Posted 22/12/12 12:00 PM Share Posted 22/12/12 12:00 PM What Adam said. If you want efficient, tune it to 250rwkw. Otherwise, watch the while deck of cards come Tumbling down on a hot day!!I saw 4+mph differences with the stock cooler in different weather. Monza doesn't cool any better.... 1 Link to comment Share on other sites More sharing options...
BigAl's04 Special needs member. Bronze Donating Members 690 Member For: 14y 4m 12d Gender: Male Location: gold coast Posted 22/12/12 12:14 PM Share Posted 22/12/12 12:14 PM (edited) How long did it take you to remove/refit plenum Impellor? If you want to see how much better it flows we could meet up at RDP and put it on my car and run it on the dyno. Lee said my stock plenum is what's holding me back from more power. Could do back to back runs and get a real comparison. Would have to be before 21/1/13 though.Cheers. Edited 22/12/12 12:16 PM by BigAl's04 Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 8m 2d Gender: Male Location: adelaide hills- 'race air' central Posted 22/12/12 12:23 PM Share Posted 22/12/12 12:23 PM that's a good idea.. 1 Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 8m 24d Gender: Male Location: Victoria Posted 22/12/12 12:33 PM Share Posted 22/12/12 12:33 PM Yeah, that's not a bad idea. 1 Link to comment Share on other sites More sharing options...
Robos F6 Donating Members 407 Member For: 15y 10m 17d Gender: Male Location: Vic Posted 22/12/12 01:19 PM Share Posted 22/12/12 01:19 PM You still running stock cat? Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 5m 29d Gender: Not Telling Posted 22/12/12 07:06 PM Author Share Posted 22/12/12 07:06 PM Congrats on taking a different route.The talk of "optimum efficiency" followed by the parts you listed is a little confusing to me. That won't be optimum for the car as a package.Over engineering the hardware for the desired result is the way to go IMO.Adam I'm am referring to the optimum efficiency of the parts that I'm using. My interest at this stage is to try and guage what I can obtain by using the factory hardware. Injectors and pump have been used as factory items are the greatest limitation.Cheers Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 5m 29d Gender: Not Telling Posted 22/12/12 07:13 PM Author Share Posted 22/12/12 07:13 PM Not bad going at $1000 total for go fast bits.Labour?Or are we not counting labour?lolSeriously.JackNo labour mate. All done by myself, except exhaust, and the $150 included labour.Cheers Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 5m 29d Gender: Not Telling Posted 22/12/12 07:18 PM Author Share Posted 22/12/12 07:18 PM How long did it take you to remove/refit plenum Impellor? If you want to see how much better it flows we could meet up at RDP and put it on my car and run it on the dyno. Lee said my stock plenum is what's holding me back from more power. Could do back to back runs and get a real comparison. Would have to be before 21/1/13 though.Cheers.Mate there's a couple hours in pulling off and replacing. My advice to you is get hold of a plenum and start grinding. Some of the feedback is that you will also make some torque lower in th rev range. Also have a look at your T/B and sand the rear smooth.Cheers Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 5m 8d Gender: Male Posted 22/12/12 08:04 PM Share Posted 22/12/12 08:04 PM So you had a offer to show people the potential of this mod yet you decline to take it up! For the sake of knowing you have improved the power and there would be a difference why not prove everyone? Or are you scared you may have wasted your time! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now