Chaos310 Donating Members 228 Member For: 12y 3m 28d Gender: Male Posted 13/12/12 12:36 PM Share Posted 13/12/12 12:36 PM Hi all,Long time lurker, I have decided to post up my up and coming build.As it sits, my ute is pretty much stock, just a K and N air filter I got from amazon . com for around $63 shipped to perth and a whiteline swaybar at the front. There is also an intake muffler delete in the engine bay and that's about it right now...Plans as it sits now:I have a MANTA 4" to twin 3" system ready to go ona set of Injector Dynamics 1000cc squirterslower temp thermostatherrod intake piping (which may be up for sale... NEW, just opened to look at)to acquire:intercooler and piping kit... (was thinking stage 2 process west kit... thoughts, comments welcome)turbo wastegate modding.. spoke to a great company that will mod the turbo when I pull it off, half a day to perform the work and a very reasonable pricesurge tank and pump set up.. ( ideas on breed welcome )11.8psi actuatoranything else I have missed???Ultimately I am only looking for 500rwhpCheers Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 7m 6d Gender: Male Posted 13/12/12 09:03 PM Share Posted 13/12/12 09:03 PM Looks like you're on the right track mate. You'll make 500HP easy with those mods.With the surge tank, just grab a process west one or who ever else makes them. Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 7m 13d Gender: Male Location: adelaide hills- 'race air' central Posted 13/12/12 09:13 PM Share Posted 13/12/12 09:13 PM def go with a good quality surge and pump. no cheap ebay junk... Link to comment Share on other sites More sharing options...
Chaos310 Donating Members 228 Member For: 12y 3m 28d Gender: Male Posted 14/12/12 12:21 AM Author Share Posted 14/12/12 12:21 AM Just looking at the range of radium surge tanks, reasonably priced and pretty good reviews. Good fuel pump comparison toohttp://www.radiumauto.com/blog-page.php?Radium-Engineering-s-Ultimate-Fuel-Pump-Test-73 1 Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 7m 6d Gender: Male Posted 14/12/12 12:24 AM Share Posted 14/12/12 12:24 AM Link to comment Share on other sites More sharing options...
Chaos310 Donating Members 228 Member For: 12y 3m 28d Gender: Male Posted 14/12/12 08:02 AM Author Share Posted 14/12/12 08:02 AM That's some food for thought..... Link to comment Share on other sites More sharing options...
F6Fury Member 135 Member For: 12y 1m 4d Posted 14/12/12 12:21 PM Share Posted 14/12/12 12:21 PM Sounds good but maybe think about a cold air box instead of the stock setup with the k&n filter,it was the 1st mod I made and I found a huge difference between the two,the one I used was a process west street airbox 1 Link to comment Share on other sites More sharing options...
Chaos310 Donating Members 228 Member For: 12y 3m 28d Gender: Male Posted 14/12/12 01:23 PM Author Share Posted 14/12/12 01:23 PM Sounds good but maybe think about a cold air box instead of the stock setup with the k&n filter,it was the 1st mod I made and I found a huge difference between the two,the one I used was a process west street airboxI was thinking about it, however I have a mate with the same fg f6 ute as me and he runs the stock intake with the muffler, a KnN and a relieved lower half airbox and makes 523hp (wheels, with other mods under the bonnet) so it'll suffice for now. I was contemplating a PW intake kit/box, but I dont believe its money I need to spend right now. 1 Link to comment Share on other sites More sharing options...
Snapper Bronze Donating Members 320 Member For: 13y 8m 10d Gender: Male Posted 14/12/12 01:45 PM Share Posted 14/12/12 01:45 PM Very true the air intake will be fine U will have to port the turbo Link to comment Share on other sites More sharing options...
Chaos310 Donating Members 228 Member For: 12y 3m 28d Gender: Male Posted 15/12/12 02:13 AM Author Share Posted 15/12/12 02:13 AM Very true the air intake will be fineU will have to port the turboYeah, I will be having the turbo relieved on the wastegate. I have been speaking with a company that previously did all our turbos from work, everything from tiny units to massive suckers off mining equipment. The first thing I said to him was "I have an XR6 Turbo.." and he said straight off the bat, "yep no worries, 38mm flapper, port the housing, cut in a flow path, face off the mount flange for a better seal, bead blast to blend it all together, rebuild, no worries at all mate, when do you want to drop it off?".... less than $500 here in perth!I will take photos before and after and if I am able to sit in on the machining work, photos of that too.If we had a Milling machine at work, I'd probably just do it myself, but alas, the machine shop was removed when we were bought out last year by a bigger company.... BUGGER..Anyway, I'll post up pics and measurements of what gets done.. It probably wont be until the new year now though.Cheers 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now