Pw 2.2 Vs 1000Hp Plazmaman

[JETURBO]

Its never going to be black and white on here becsuse as far as I know not one person on here except the cooler builders have done that kind of testing back to back with the right stats in place

Many have an opinion but very few know and at that top end level ull be hard pressed to get correct information as way to many variables from bloke to bloke

There were people swopping out pw coolers for 1000hp plaz coolers and talking about the gains after,but kev has come out to say he knows his products better and even offered to pay for his cooler if it didnt perform better than said competitor ..... It just gets a bit messy that's why u wont get a clear answer of ......this cooler ______ is best !

What u can do it phone up and ask for a stat sheet ........ If they cant supply u with one or at least results from testing then u have to ask why !

Problem is both pw and plaz are up top of the gravy train and both companys would know whose cooler has the edge, kev does ALOT of testing against the market but I dare say so would plaz being one of the biggest intercooler companys in the world

Do u c why its now not so easy ..........

[mummba]

bar and plate vs tube and fin... no comparison on the street, tube an fin all the way

[possum]

what makes you say that?

[CCCC]

my nizpro cooler worked out best for me, I thing its best that if you are after a cooler talk to your tuner because with all the data he captured with previous tunes, he would know what works best.

[Never had any say Panda]

Is the nizzy cooler tube and fin? Or bar and plate?

[JETURBO]

Bar and plate my nizzy one

[CCCC]

Mine is bar an plate from nizpro, I think all nizpro coolers are bar an plate now, they may have had tube an fin on the earlier design but they seem to do all bar an plate these days, which is better for drag racing in my opinion.

[relentless xr6]

If you are trying to save weight than a plazmaman is the go

[PJ.]

  On 16/12/2012 at 3:36 AM, CCCC said:

Mine is bar an plate from nizpro, I think all nizpro coolers are bar an plate now, they may have had tube an fin on the earlier design but they seem to do all bar an plate these days, which is better for drag racing in my opinion.

I'm interested to hear what you based your opinion on for this statement....

[stee3]

  On 16/12/2012 at 10:18 PM, PJ. said:

I'm interested to hear what you based your opinion on for this statement....

Probably because Simon said!