Jump to content

Siemens 80Lb Injectors Vs 60Lb


Recommended Posts

  • RNS10S
  • Donating Members
  • Member For: 18y 2m 24d
  • Gender: Male

I was told to stay well away from the Siemens injectors by local tuner.

He said they are terrible..

Recomended Herrod 100lbs or bosch/id1000's..

Way better off spending the extra to get the better injectors..

Who is your local tuner?

Whilst I agree that a 100lb bosch would be a better choice the seimens 60/80's have been used by heaps of tuners with great results.

I had 60's with 370 rwkw and did not have an issue, I upgraded to 80's as I got them cheap and recovered most of the money selling my 60's and they are still in the car and again have not had an issue with them at 405rwkw, have run a 10 sec pass and drive 100 klms a day.

Edited by rednose
  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 12y 2m 10d

My local guys are East Coast Customs..

Their argument was that the 1000's are easier to tune, so save you cash on tuning time. And they are more stable/accurate at very low pusle widths saving you cash on fuel.. Use less fuel while at low load.. Which is a good deal of the time while cruising around.

So spending a few bucks extra on the better injector pays for itself very quickly.

Link to comment
Share on other sites

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Donating Members
  • Member For: 16y 7m 21d
  • Gender: Male
  • Location: Vic

Slightly off topic but I have a question..

I'm looking to run e85 on my NA FG.. I've been told the 60's are my best bet, is that correct?

They'll be fine.

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 12y 9m 8d

Are there any positives/negatives? and will it impact on my tune (harder for the tuner, easier etc).

What does your tuner recommend ? Personally, I went with Bosch EV14 1000s and I can't fault them. Even happier that I got them at cost price :sungum:

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 11y 11m 3d

Putting all brands aside the theory is like henz said, the smaller the injector the more accurately the injector can be controlled eg dont get a 1000cc injector if a 600cc is all you will ever need

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 11y 10m 10d

id 1000s are far better than dekas fitted some shorty dekas from rapid systems 3 weeks ago and they would not seal in rail,incorrect size adaptors and plug hit on head making them leak,removed them and fitted id1000s

  • Like 1
Link to comment
Share on other sites

  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 5m 29d
  • Gender: Male
  • Location: Gold Coast

I would think the bosch F6 spec 440cc injectors would handle E85 in a N/A FG. You'd get a good s/c hand set for around $200. Fit straight in - no adaptors or anything else required.

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 19y 18d
  • Gender: Male
  • Location: 2 Dunorlan Road Edwardstown S.A. 08 82999998

The Bosch EV14 injectors are available brand new in 550cc / 1000cc / 2000cc

As mentioned previously , this is exactly the same injectors renamed by many companies including ID, Xspurt , Deutsch Werks and ourselves.

I would suggest the KPM1000cc injector that has been match set to within +/- 1% would suit your needs for both perfect idles, massive power (including E85) and ease of figment and tuning.

We also supply this injector with all the correct scaling for the Australian Fords.

We purchase directly from Bosch ( no American middle man company ) match test, supply overnight, offer the cheapest ongoing price and off er 100% guarantee and support direct on phone.

Edited by KPM Motorsport
  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'