jacobmitchell92 Donating Members 370 Member For: 13y 9m 10d Gender: Male Location: Perth Posted 18/11/12 08:41 AM Share Posted 18/11/12 08:41 AM G'day all! I know it us prolly been asked a few times but I have no idea how to use the search on my phone! I have a 2009 Fg xr6 turbo, it has a few mods such as process west stage 2 intercooler, 1000id injectors, full 4inch stainless xforce exhaust, process west surge tank, tune and zf tune and I'm sort of over it now! So iv been looking at taking the next step, would I better off getting a precision turbo if so what size or just stick with a f6 turbo, I will also be getting valve springs and turbo side intake done at the same time.I use Rob Harvey at monsta torque in Perth, any help would be greatful!Thanks Jacob Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 10m 14d Gender: Male Location: perth Posted 18/11/12 08:53 AM Share Posted 18/11/12 08:53 AM rob does a good upgrade using your turbo with a .7 cover and 66mm wheel,is a good cost effective upgrade.... Link to comment Share on other sites More sharing options...
jacobmitchell92 Donating Members 370 Member For: 13y 9m 10d Gender: Male Location: Perth Posted 18/11/12 10:04 AM Author Share Posted 18/11/12 10:04 AM Yeah righto I might have a word with him! its a bit hard at the moment as im out in the middle of the ocean working! what sort of power would you expect to get out of that? Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 6m 12d Gender: Male Location: OZ Posted 18/11/12 10:19 AM Share Posted 18/11/12 10:19 AM 6262 is comparable to a GTX3582r.Next is a 6266 (62mm comp inducer which is the same as a F6 turbo but has a bigger exhaust side. Next step is a 6466 and then a 6766. The precision units are not a direct bolt-on like the Garrett GT35 series so be prepared to pay a fair bit extra. The GT3566r (so they call it) which uses a 66mm TO4z compressor instead if the usual 61.4mm (the one Mumba is talking about)!is a common upgrade but you're better off with a GTX35r as it uses the latest technology turbine design and the compressor is better matched to the exhaust turbine. 1 Link to comment Share on other sites More sharing options...
jacobmitchell92 Donating Members 370 Member For: 13y 9m 10d Gender: Male Location: Perth Posted 18/11/12 10:35 AM Author Share Posted 18/11/12 10:35 AM Alright thanks for your help! im hoping to achive around 400rwkw maybe a bit more, I know the tail shaft will have to be done and the ZF will need doing eventually though! Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 28d Gender: Male Location: Perth Posted 18/11/12 10:36 AM Share Posted 18/11/12 10:36 AM 400rwkw?GTX3582/6262/end thread Link to comment Share on other sites More sharing options...
GTEXXED Banned Banned 910 Member For: 12y 6m Gender: Male Posted 18/11/12 10:43 AM Share Posted 18/11/12 10:43 AM If you only wanted a max of 400rwkw then the GTX3576 will be a great option,slightly better spool than the F6 turbo or as said GTX3582. Link to comment Share on other sites More sharing options...
--Jase-- Member 66 Member For: 12y 4m 21d Posted 19/11/12 05:44 AM Share Posted 19/11/12 05:44 AM I have a BorgWarner s300sx FMW turbo sitting here that I bought for a different project.. Considering using it, though its only a .91 divided t4 housing..Its either that, or step up to a 6466..I have to buy a manifold either way...I still haven't managed to find anyone who's running a 6466 to see the results..Messaged XFT. No reply.. :( Link to comment Share on other sites More sharing options...
dalts Member 755 Member For: 18y 7m 25d Gender: Male Location: brisbane Posted 19/11/12 07:03 AM Share Posted 19/11/12 07:03 AM There's only 2 of us that are running the 6466 both should be tuned around Xmas so I'll have some results then!! Link to comment Share on other sites More sharing options...
mummba Member 525 Member For: 14y 10m 14d Gender: Male Location: perth Posted 19/11/12 09:55 AM Share Posted 19/11/12 09:55 AM keep us updated lee, keen to see how this combo goes!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now