Abs/tcs Module Not Responding To Diagnostic Tool

[KeddyXR6T]

So abs/tcs isn't responding and I need to know where ill find the ABS/TCS C150 CIRCUIT 70 (SB-W) is before I go replacing the ABS module anyone know this issue any insight would be appreciated

And on a separate note WTF is with the BA Loom Being wrapped around (ran through) the Inlet manifold love to know fraud's thinking behind that one

Edited 12/11/12 09:49 AM by KeddyXR6T

[bionicxr6t05]

C-150 is a connector code, why do you need to replace te module?

Edited 12/11/12 10:42 AM by bionicxr6t05

[KeddyXR6T]

abs and traction stopped working tried to fault code it with two different diag tools and wouldn't work pulled out the workshop manual and if it's not that C150 circuit it would be the module as far as I can understand ??

Edited 12/11/12 11:00 AM by KeddyXR6T

[bionicxr6t05]

Depends, id be inclined to see if fords ids can talk to it, have you tested high speed canbus?

[KeddyXR6T]

Yeah still no communication

[bionicxr6t05]

So what was the resistance of high speed bus?

[KeddyXR6T]

don't know TBH, Fraud returned the car and who ever I spoke to at the workshop said that there next move would be to replace the module cause everything eles seems fine and then charged me $110 for the 30 mins it was there Cnts

[bionicxr6t05]

Hmmm, seems odd, they dont normally fail and 30min is not long enough to test every possible thing

[KeddyXR6T]

that's what I was thinking I have a feeling ill replace the module and still have the issue and no doubt they will say cause they haven't fitted it

[Paulie2256]

If they say that haven't fitted it then they can't charge you for it.

Edited 15/11/12 09:42 PM by Paulie2256