AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 17d Gender: Male Location: Canning Vale, W.A Posted 07/06/13 01:45 AM Share Posted 07/06/13 01:45 AM Hey guys, who can I see about this setup in the Perth metro area? Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,432 Member For: 14y 11m 20d Gender: Male Location: Melbourne Posted 07/06/13 02:48 AM Share Posted 07/06/13 02:48 AM Um go back to xft Link to comment Share on other sites More sharing options...
AzMahoony Hench, but no longer shredded or tanned. Member 3,343 Member For: 17y 8m 17d Gender: Male Location: Canning Vale, W.A Posted 27/07/13 12:50 AM Share Posted 27/07/13 12:50 AM I ordered a gtx yesterday and was just wondering what you guys did with fitting the actuator up? Utilize the stock bracket off the std? Link to comment Share on other sites More sharing options...
fehlbie Donating Members 142 Member For: 15y 8m 14d Posted 13/09/13 01:05 PM Share Posted 13/09/13 01:05 PM I went to have my car tuned today. I have a GTX3582 with the waste gate ported by GCG and running a 12psi actuator. Straight feed from the compressor housing to the actuator and I was getting 22psi at 3400rpm. Has anyone else had this problem? Seems the waste gate cannot keep up with the flow of exhaust. The wastegate is cracking at 10psi. 1 Link to comment Share on other sites More sharing options...
Bonjaz Donating Members 1,841 Member For: 16y 7d Gender: Male Location: CQ Posted 13/09/13 10:22 PM Share Posted 13/09/13 10:22 PM Did you inspect and visually see that the wastegate was ported? I bought a turbo from a company that "had full turbo ported" it was the sh*ttest porting ever. Drove 500km for a tune and couldn't keep it below 21psi. Drove the 500km home and pulled it off and sent it to my tuner who ported it properly, drove the 500km again a few weeks later and all was sweet. Link to comment Share on other sites More sharing options...
Trent0 The Toxic Rocket Donating Members 574 Member For: 14y 7m 20d Gender: Male Location: Brisbane Posted 14/09/13 07:22 AM Share Posted 14/09/13 07:22 AM fehlbie - Happened to me, that's why I done an external gate setup - now have a 45mm hole My porting job was done by MTQ in Toowoomba, it was very average to say the least! Link to comment Share on other sites More sharing options...
fehlbie Donating Members 142 Member For: 15y 8m 14d Posted 14/09/13 07:53 AM Share Posted 14/09/13 07:53 AM How did you do your external setup? Off the factory manifold? or off the turbine housing? Link to comment Share on other sites More sharing options...
Trent0 The Toxic Rocket Donating Members 574 Member For: 14y 7m 20d Gender: Male Location: Brisbane Posted 14/09/13 09:29 PM Share Posted 14/09/13 09:29 PM off the rear turbine housing. turned out to be a very neat and hidden setup Link to comment Share on other sites More sharing options...
fehlbie Donating Members 142 Member For: 15y 8m 14d Posted 15/09/13 08:06 AM Share Posted 15/09/13 08:06 AM Got any Pictures? Link to comment Share on other sites More sharing options...
Trent0 The Toxic Rocket Donating Members 574 Member For: 14y 7m 20d Gender: Male Location: Brisbane Posted 15/09/13 11:29 AM Share Posted 15/09/13 11:29 AM I have some others of it off the car but can't upload atm Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now