bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 8m 23d Gender: Male Posted 02/11/12 10:01 PM Share Posted 02/11/12 10:01 PM Ford could have changed something they shouldnt have Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1319761 Share on other sites More sharing options...
bionic_oosty Donating Members 241 Member For: 13y 3m 6d Gender: Male Location: Sydney/Wollongong Posted 05/11/12 11:06 AM Share Posted 05/11/12 11:06 AM What a pain in the ass problem & to have it start after leaving Ford dealership is a sh!tgo... earlier this year I was taking my car for a berl up Mac Pass, but at the very bottom I lost the speedo & the car was hitting boost cut way to early at like 3500rpm every gear. Turned it off at the top, started it, never had a problem since!I wouldn't have let Ford get away with giving you the cold shoulder mate. They were the last people to play with the computer before all this!Goodluck with it Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321077 Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 22y 20d Gender: Male Posted 05/11/12 11:46 AM Share Posted 05/11/12 11:46 AM Am I going crazy.Its a VSS error. The sensor is in the gearbox. You talked about checking the wheel ABS sensors. It aint that. Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321084 Share on other sites More sharing options...
leafy Member 21 Member For: 12y 6m 28d Posted 05/11/12 05:20 PM Author Share Posted 05/11/12 05:20 PM according to the gregorys manual abs models (didnt realise there was a non abs model) use wheel speed sensors but my ford knowledge is about as good as what ive read in the manual.after 5 phone calls and a very angry visit ford have agreed to look at it wednesday free of charge until they can verify it wasnt there fault. (I bet they verify that quick)my brother has reminded me just this morning that before the car went to ford (while it wasnt starting) for the last error we removed the icc to run boost gauge line. is it possible I havent plugged it back in correctly and its not getting the info from speed sensor correctly. Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321120 Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 8m 23d Gender: Male Posted 05/11/12 08:52 PM Share Posted 05/11/12 08:52 PM (edited) Even early 4 speed sedans dont have a speedo transducer in the box, only ba utes have one Edited 05/11/12 08:52 PM by bionicxr6t05 Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321133 Share on other sites More sharing options...
turbotrana Member 2,586 Member For: 22y 20d Gender: Male Posted 06/11/12 02:16 PM Share Posted 06/11/12 02:16 PM BA ABS light on - Speedo not working -Transmission shifting erraticallyCheck collar on the rear axle as it is known to move. If it has moved, the distancebetween the ABS sensor & reductor will be increased, causing the faultsJust copied this from a fault sheet. May or may not help Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321584 Share on other sites More sharing options...
leafy Member 21 Member For: 12y 6m 28d Posted 07/11/12 06:35 AM Author Share Posted 07/11/12 06:35 AM thanks turbotrana.the abs light isnt on but other stuff does sound right ill look into it.car has gone to ford today and they have said the pcm is fooked, now im finding that hard to believe as1. it lets me flash tune it2. auto elecy mate used his snap on obd2 scanner and he said everything is sending and working properly.3. the reseting computer and relearn idle steps work properly, if it was faulty I dont see how this could work.4. other than the speed sensor error and vid block programming error the car runs as expected.5. apparently this is a common ford excuse to fix all problemsthoughts on the matter?id rather let it burn in a paddock than shell out more thousands Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321952 Share on other sites More sharing options...
leafy Member 21 Member For: 12y 6m 28d Posted 07/11/12 07:30 AM Author Share Posted 07/11/12 07:30 AM P0602 - Control Module Programming ErrorThis Diagnostic Trouble Code (DTC) indicates programming error within Vehicle ID block (VID).VID data corrupted by the scan tool during VID reprogrammingUsing the scan tool, reprogram the VID block. If PCM does not allow reprogramming of the VID block, reflashing PCM will be required.this is my error code, which leads me to believe ford dealer should accept responibility? Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321966 Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 8m 23d Gender: Male Posted 07/11/12 07:33 AM Share Posted 07/11/12 07:33 AM If ford only did an acm program for te audio code it will hae nothing to do with them, acm programming doesnt touch the pcm program. Sounds like something wrong with your flash tuner 1 Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321967 Share on other sites More sharing options...
leafy Member 21 Member For: 12y 6m 28d Posted 07/11/12 08:01 AM Author Share Posted 07/11/12 08:01 AM would it really need a new pcm but I dont see how?maybe just a reprogram? Link to comment https://www.fordxr6turbo.com/forum/topic/82659-no-speedo-limp-mode/page/3/#findComment-1321984 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now