Jump to content

Car Hard To Start After Tune


ian69

Recommended Posts

  • Bronze Donating Members
  • Member For: 12y 3m 21d

no central qld im not sure what to think but im pissed it wont start like it did im going to ring him tommoro and take it back to get the fuel pump fixed .im also thimking about taking it to mackay an talk to cpv tuning and just check it all out .

Link to comment
Share on other sites

  • Banned
  • Banned
  • Member For: 12y 3m 16d
  • Gender: Male

Damn,my 60's were 500 installed and the tuner sourced them new.If it made 380rwhp then that's 42lb territory as they max out at roughly 330-350rwkw.I agree 60's would have been a wiser choice if more power is to be sought after.

If you ever get told the printer isn't working then ask for the screen to be reloaded so you can take a picture with your phone.

Link to comment
Share on other sites

  • Bronze Donating Members
  • Member For: 12y 3m 21d

$709.00 four the injectors $90.00 to fit them I just thought they would put 60lb in I mean I read a lot off post in here and everyone runs 60lb .now im going to have to find some one to check the tune again .

Link to comment
Share on other sites

  • Banned
  • Banned
  • Member For: 12y 3m 16d
  • Gender: Male

Ok,lets not jump to any bad conclusions yet,who did the work?

Don't take the car to anyone else until you get the starting issue sorted at the place you payed money too,42lb injectors are good for 400rwhp no worries,is this enough for you ya think?Maybe ask them to change the injectors over as you thought 60s were going in,also what made you think this,did they mention them or assumption?

Taking a dud car so to speak to a different tuner is the worst thing to do,get the issues seen to back at original place and then if happy stay with them.

Edited by GTEXXED
Link to comment
Share on other sites

  • Donating Members
  • Member For: 15y 10m 28d
  • Gender: Male
  • Location: CQ

im in CQ too mate who did the work, I may be able to shed some light on shops in the area? I would go back to them asking alot of questions about genuine parts, what pump they used and if they used submersible fuel line because if they didnt I can guarantee that the hose inside will go soft slimy and eventually perish and fall off, then she will run like sh*t I made that mistake on my very first bf, and get a print out of dyno. Get them to fix the problems first but I cant speak highly enough about Dave at cpv in mackay he has done a few of my cars.

  • Like 1
Link to comment
Share on other sites

  • Bronze Donating Members
  • Member For: 12y 3m 21d

I am taking it back and I just thought they would put 60lb in .saying that I would be happy with 350hp. I just need to chill

and I not trying to bag there work just wanted see what people think .
Link to comment
Share on other sites

  • Bronze Donating Members
  • Member For: 12y 3m 21d

alrite I rang today they said to bring it back they took the ute out the back and fix it straight away put a new check vavle in come and asked me if there was any think else so I asked all the question;s that I got off you blokes and all was good .so could;t complain about that .and thanks to all you blokes as I new what to ask P1010056.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'