jas98 Member 1,046 Member For: 12y 6m 8d Gender: Male Location: Maryborough Qld Posted 24/11/12 03:45 PM Share Posted 24/11/12 03:45 PM with bloking off the vacum line to the BOV do you just pull it off and put a screw in the hose?would this damage anything? or is it fine ? Link to comment Share on other sites More sharing options...
lrmcdowell Donating Members 730 Member For: 13y 5m 5d Gender: Male Location: Randwick, sydney Posted 24/11/12 07:04 PM Share Posted 24/11/12 07:04 PM I didnt block the vaccum when I did it. just need to block the first pipe on the left if I remember. closest to the turbo. that will be enough dont worry about the vaccum...or did I block that off? dont think I did Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 2m 9d Gender: Male Location: SE Melbourne Posted 24/11/12 09:26 PM Share Posted 24/11/12 09:26 PM (edited) It's better to block the vac because off boost it is exactly that. Edited 24/11/12 09:26 PM by Paulie2256 Link to comment Share on other sites More sharing options...
Goliath Member 383 Member For: 14y 6m 16d Gender: Male Location: Sydney Posted 25/11/12 12:15 AM Share Posted 25/11/12 12:15 AM I didn't remove the vac line, just plugged it up. Link to comment Share on other sites More sharing options...
jas98 Member 1,046 Member For: 12y 6m 8d Gender: Male Location: Maryborough Qld Posted 25/11/12 12:39 AM Share Posted 25/11/12 12:39 AM so, I block off the BOV line that's on the cross over pipe? as in pics on here/however will this cause any ill effect for the turbo? especially on boost. I guess this would affect it more with larger boost levels but not factory 5psi? Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 8m 15d Gender: Male Location: adelaide hills- 'race air' central Posted 25/11/12 06:36 AM Share Posted 25/11/12 06:36 AM here we go again...... 1 Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 22y Gender: Male Location: Sydney Posted 25/11/12 06:41 AM Share Posted 25/11/12 06:41 AM Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 2m 9d Gender: Male Location: SE Melbourne Posted 25/11/12 06:44 AM Share Posted 25/11/12 06:44 AM No your turbo does not spin backwards Link to comment Share on other sites More sharing options...
jas98 Member 1,046 Member For: 12y 6m 8d Gender: Male Location: Maryborough Qld Posted 25/11/12 09:20 AM Share Posted 25/11/12 09:20 AM lol, well aint the noise the pressure hitting the turbo wheel, in turn cause pressure/wear on the turbo? I am completly aware the turbo will not turn backwards lol.thanks anyway! Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 22y Gender: Male Location: Sydney Posted 25/11/12 09:22 AM Share Posted 25/11/12 09:22 AM no no fcukin nothe flutter sound; the intake air reverberating off the compressor wheel if you are worried about excess wear, or your compressor wheel bending, or heating up, or bending a shaft, or excess spinning on shutdown, or excess driveline lash, or whatever, dont do the mod ulehsooooooooooooooooooooooooooooooooooooooo tempted to lock this thread ulehanybody want to add some cheers or maybe diffbush?thanks anyway!cheers Link to comment Share on other sites More sharing options...
Recommended Posts