Earls Filter Fitted...with A Difference..

[willo88]

Excuse the dust.

[stiv6]

So where does one get the clamps and what size?

[bamk2f6tornado]

Pirtek 8mm I think

[GeGe6]

^^^ ?

Seem from the posts in last half of thread there could be difference in BF FG.

I'm sure the hard pipe on my 2011 was 11.8mm.

I went to Coventrys measured pipe order from Areoflow catalogue.

As said, had to pack braided line to fit clamp.

Link of earls kit brought.

http://pages.ebay.com/link/?nav=item.view&alt=web&id=170942058826

Edited 23/10/14 11:39 AM by GeGe6

[demon1300]

  On 23/10/2014 at 11:10 AM, stiv6 said:

So where does one get the clamps and what size?

I found the -5 AN clamps to be perfect

Got mine from aliexpress for $7 a pop which is a damn site cheaper than in aus. Can get them in diff colours too.

http://www.aliexpress.com/item/5AN-AN5-5AN-ID-12-7mm-Billet-Fuel-Black-Hose-Separator-Fittings-Adapter-SEP-5/1653180401.html

[norrs]

  On 23/10/2014 at 11:39 AM, GeGe6 said:

^^^ ?

Seem from the posts in last half of thread there could be difference in BF FG.

I'm sure the hard pipe on my 2011 was 11.8mm.

I went to Coventrys measured pipe order from Areoflow catalogue.

As said, had to pack braided line to fit clamp.

Link of earls kit brought.

http://pages.ebay.com/link/?nav=item.view&alt=web&id=170942058826

Ok Bought my kit. Measured my hard hose on FG 2010 F6 and its 12.5mm

[norrs]

so what size if the braided line?

[willo88]

Braided line is a -4 which is about 8 mm from memory

[demon1300]

Get then -5 clamps though as that's what fit the hard water lines perfectly. Just use a bit of rubber in them for the smaller hose.

[willo88]

-5's are too small for FG water lines. Water line is about 12.7 mm (1/2 inch). It will snuggly fit the -4 oil line however. I'd get a -7