The Converted Donating Members 344 Member For: 13y 4m 11d Gender: Male Location: Melbourne Posted 24/10/12 03:53 AM Author Share Posted 24/10/12 03:53 AM That's why I bought two sets. Hehe. Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 13y 11m 29d Posted 24/10/12 05:18 AM Share Posted 24/10/12 05:18 AM I still use a set of the old "cheap" unit from 4-5 years ago. Branded "GSP". Aside from bad harmonics on lowered cars due to the tripod cv design, they haven't broken in my car yet! Link to comment Share on other sites More sharing options...
The Converted Donating Members 344 Member For: 13y 4m 11d Gender: Male Location: Melbourne Posted 24/10/12 05:20 AM Author Share Posted 24/10/12 05:20 AM The inside cv on the interparts branded Repco units are also tripod design. Link to comment Share on other sites More sharing options...
The Converted Donating Members 344 Member For: 13y 4m 11d Gender: Male Location: Melbourne Posted 28/10/12 07:08 AM Author Share Posted 28/10/12 07:08 AM Just thought I should add the part numbers of the Repco units. Right: NSA328Left: NSA329RegardsMichael 1 Link to comment Share on other sites More sharing options...
nelsonian101 Donating Members 961 Member For: 16y 6m 23d Gender: Male Location: Sydney Posted 28/12/12 05:06 AM Share Posted 28/12/12 05:06 AM Has anyone used these below?http://www.driveshaftshop.com/domestic-axles/ford/ford-2003-2006-falcon-950hp-direct-bolt-in-axle-supercharged-v8-and-turbo-6-level-5-rear-axleDiff Technics also make a billet one that looks good too but is pricey unfortunately.Recommend any of the ebay ones?http://www.ebay.com.au/itm/261098946895?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649I have heard rumours that they dont last long on lowered cars. Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 13y 11m 29d Posted 28/12/12 05:35 AM Share Posted 28/12/12 05:35 AM Top ones look great. I'll be buying something like that next time around. I've got GSP shafts ($250 a side) from eBay in mine now with around 350rwkw and havent broken one in 12 months of using them. Survived a drag session too. But on a car any lower than SSL they vibrate like all hell !! Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 5m 1d Gender: Male Posted 28/12/12 11:07 AM Share Posted 28/12/12 11:07 AM Has anyone used these below?http://www.driveshaf...vel-5-rear-axleDiff Technics also make a billet one that looks good too but is pricey unfortunately.Recommend any of the ebay ones?http://www.ebay.com....984.m1423.l2649I have heard rumours that they dont last long on lowered cars.that's where Diff Technics get them from Link to comment Share on other sites More sharing options...
nikofgxr6t Bronze Donating Members 284 Member For: 13y 11m 26d Gender: Male Posted 28/12/12 11:02 PM Share Posted 28/12/12 11:02 PM this is the ones im most likly getting for my car but for FG sometime next month shipping fees are like over $700 cheaper to import a jet ski lol http://www.driveshaftshop.com/domestic-axles/ford/ford-2003-2006-falcon-1400hp-full-chromoly-level-5-axle-hub-kit-supercharged-v8-and-turbo-6-level-5-rear-axle Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 5m 1d Gender: Male Posted 28/12/12 11:20 PM Share Posted 28/12/12 11:20 PM this is the ones im most likly getting for my car but for FG sometime next month shipping fees are like over $700 cheaper to import a jet ski lolhttp://www.driveshaf...vel-5-rear-axleJust get them from Con at Diff Technics, pretty sure he sells them for around $2300.They are the same as the 700hp version (which used to be rated at 1000hp before the 1400hp ones came out..lol)The only difference is this kit comes with a hub for the larger 33 spline stub, but you then need to press out your bearings and fit onto the new hub.Might be better to just get new bearings and fit them. Link to comment Share on other sites More sharing options...
nikofgxr6t Bronze Donating Members 284 Member For: 13y 11m 26d Gender: Male Posted 29/12/12 03:43 AM Share Posted 29/12/12 03:43 AM Just get them from Con at Diff Technics, pretty sure he sells them for around $2300.They are the same as the 700hp version (which used to be rated at 1000hp before the 1400hp ones came out..lol)The only difference is this kit comes with a hub for the larger 33 spline stub, but you then need to press out your bearings and fit onto the new hub.Might be better to just get new bearings and fit them.Oh ok so there all pretty much the same I might give him a call cheers for that Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now