Mr_4.0 Member 1,096 Member For: 13y 10m 4d Posted 17/10/12 08:00 AM Share Posted 17/10/12 08:00 AM I'd go into the compressor housing myself also. Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 4m 3d Gender: Not Telling Posted 17/10/12 08:25 AM Share Posted 17/10/12 08:25 AM No worries bionic.Impellor, is my oil cap not shiny enough for you? GTEXXED, I have flow issues with the head, (previous owner, capa generic flash, valve seats rooted) so I'm limited to 332rwkw. Not willing to spend thousands of dollars on headwork for a 30 or 40 kw gain on the skinny BA rods. I'll eventually be getting a full atomic motor :-)RegardsMichaelActually no its not shiny enough, but you will not be happy when it goes brittle, and starts breaking off into your engine,Cheers 3 Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 12d Gender: Male Posted 17/10/12 08:42 AM Share Posted 17/10/12 08:42 AM You can just see it Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 3m 27d Gender: Male Posted 17/10/12 09:02 AM Author Share Posted 17/10/12 09:02 AM Ah yeh il prob do mine just above te writing Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 12d Gender: Male Posted 17/10/12 09:57 AM Share Posted 17/10/12 09:57 AM I used the 0 on the housing as it was perfect for the drill bit to sit in and not scratch away. Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 3m 27d Gender: Male Posted 17/10/12 10:01 AM Author Share Posted 17/10/12 10:01 AM Oh yeah good idea! Link to comment Share on other sites More sharing options...
The Converted Donating Members 344 Member For: 13y 2m 16d Gender: Male Location: Melbourne Posted 17/10/12 12:43 PM Share Posted 17/10/12 12:43 PM (edited) The oil cap going brittle sounds like an issue, however Ford appear to have used the same cap for years and I've not yet seen one do what you have described. As for the lack of shine; my car is a daily driver, not a show car. The only reason I went with the polished plenum was due to the fact that the polished cooler piping (installed by previous owner) would look silly going into a black plenum. Also, when I get sick of it, I can pull it off and paint it black. I'll stop hijacking the thread now, my apologies. Edited 17/10/12 12:44 PM by The Converted Link to comment Share on other sites More sharing options...
The Converted Donating Members 344 Member For: 13y 2m 16d Gender: Male Location: Melbourne Posted 17/10/12 04:05 PM Share Posted 17/10/12 04:05 PM Thought of some usefull info to add for bionic;If you don't place the nipple in or close to the standard location, remember to get a longer piece of hose as it will most likely no longer reach the new nipple location. RegardsMichael Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 3m 27d Gender: Male Posted 17/10/12 10:56 PM Author Share Posted 17/10/12 10:56 PM Good idea kosij! Link to comment Share on other sites More sharing options...
xeghia82 Member 54 Member For: 12y 10m 15d Gender: Male Location: Melbourne, South Eastern Suburbs Posted 23/10/16 09:11 AM Share Posted 23/10/16 09:11 AM Hey guys, I know this is an old thread but I didn't want to start another thread about the same topic. Which position would be the best to put the boost reference fitting? I have uploaded a picture from pictures in this thread. A or B? Thanks, George Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now