jonn Member 141 Member For: 15y 10m 28d Gender: Male Location: Carrum, VIC Posted 06/10/12 12:02 PM Share Posted 06/10/12 12:02 PM just wondering if anyone that has made a intake box for the battery side has any dimensions to cut so I can make my own? 1 Link to comment Share on other sites More sharing options...
Goliath Member 383 Member For: 14y 3m 27d Gender: Male Location: Sydney Posted 07/10/12 04:28 AM Share Posted 07/10/12 04:28 AM (edited) Haven't made one myself, but it should be fairly simple. FYI that pic is not the rapid intake and is a little more difficult due to the bend in the side piece which is not needed.Take the battery out. measure the distance from the fuse box to about the headlight and also the depth, cut a square/rectangular piece which should sit straight in there. You could mock up the top piece with some paper if you like then cut the metal to suit. So pretty much, you only need two pieces of metal. Don't forget mounting points for screws.Good luck if you give it a go!edit: check this link and you will see its just a couple of pieces Edited 07/10/12 04:30 AM by Goliath 1 Link to comment Share on other sites More sharing options...
Never had any say Panda I <3 Floods Silver Donating Members 11,198 Member For: 13y 3m 10d Gender: Male Location: South West QLD Posted 07/10/12 05:36 AM Share Posted 07/10/12 05:36 AM Why not grab some cardboard to do a template.. Test it one some plywood.. Then final cut it from metal? 1 Link to comment Share on other sites More sharing options...
cjsxrt Donating Members 145 Member For: 15y 10m 29d Posted 07/10/12 06:14 AM Share Posted 07/10/12 06:14 AM I made my intake box pretty simple I got tin folded it up and cut to suit 1 Link to comment Share on other sites More sharing options...
jonn Member 141 Member For: 15y 10m 28d Gender: Male Location: Carrum, VIC Posted 14/10/12 11:09 AM Author Share Posted 14/10/12 11:09 AM Haven't made one myself, but it should be fairly simple. FYI that pic is not the rapid intake and is a little more difficult due to the bend in the side piece which is not needed.Take the battery out. measure the distance from the fuse box to about the headlight and also the depth, cut a square/rectangular piece which should sit straight in there. You could mock up the top piece with some paper if you like then cut the metal to suit. So pretty much, you only need two pieces of metal. Don't forget mounting points for screws.Good luck if you give it a go!edit: check this link and you will see its just a couple of piecesthanks mate, yeh I wouldnt mind getting the 4" intake kit from the website but dont know how it will fit with the HDI cooler kit.gave it a shot with some plastic acrylic 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now