discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 21d Gender: Male Location: Probably above atmospheric pressure Posted 10/10/12 10:29 AM Share Posted 10/10/12 10:29 AM It looked killer in the stills you put up after the repaint. Get her fixed nice and strong so we can see it on a drive! Link to comment Share on other sites More sharing options...
josh_hammy Member 192 Member For: 13y 17d Gender: Male Location: Perth, WA Posted 13/10/12 12:20 PM Author Share Posted 13/10/12 12:20 PM Problem Solvered everybody..!!!!Big thanks to Luke for the help and use of his TIG.Ended up using 3 x 1/2" washers.Tacking them together to make the overall thickness match the old plastic piece. Then notching out a slot in the washers and welding in the pushrod of the Mc.... Works a treat and no doubt stronger then ever.Thanks for all the input fellas..saved me hundreds !!$$!! Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 21d Gender: Male Location: Probably above atmospheric pressure Posted 13/10/12 02:10 PM Share Posted 13/10/12 02:10 PM Burnout 1 Link to comment Share on other sites More sharing options...
turbojosh Donating Members 284 Member For: 11y 6m 11d Gender: Male Location: St Marys 2760 Posted 22/03/14 11:32 AM Share Posted 22/03/14 11:32 AM Sorry to dig up an old thread guys, but I had this exact problem recently and did what you did by making up my own set up and welding it together. I have found now though that the take up point on the clutch is ridiculously high! Is there any way to adjust the pedal down to make it easier to drive? Its really weird trying to drive it now :/ Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 18d Gender: Male Location: Perth Posted 22/03/14 11:46 AM Share Posted 22/03/14 11:46 AM No adjustment. You have obviously changed the installed length.Measure and modify. Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 10m 8d Gender: Male Location: SW Sydney Posted 24/03/14 01:51 AM Share Posted 24/03/14 01:51 AM As above, you'll have to re-do it...Also, we prefer you to dig up an old thread, better than starting a new one for a topic that has already been started! Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 18d Gender: Male Location: @ my laptop Posted 24/03/14 06:36 AM Share Posted 24/03/14 06:36 AM or clutch is just about worn out Link to comment Share on other sites More sharing options...
nick d Donating Members 1,594 Member For: 14y 5m Gender: Male Location: Melb Posted 08/06/14 12:02 AM Share Posted 08/06/14 12:02 AM (edited) Clutch Pedal Hi all, Thought I'd keep this these going rather than starting a new one.Clutch pedal just went on a 07 BF XR6T II, exact same thing to post #1.Noticed a little splat of oil on foot when clutch pedal went straight to the floor while taking off in first gear (clutch pedal went straight to the floor).Noticed the black plastic broken (will take pictures for reference) on the floor but my concern is the oil.Is it just replace the black plastic (where to get it from, ford, Repco, Bursons?) or could it be more with cylinder to be replaced???Thoughts? Edited 08/06/14 12:06 AM by nick d Link to comment Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 14y 10m 27d Gender: Male Location: Christchurch, New Zealand Posted 08/06/14 04:54 AM Share Posted 08/06/14 04:54 AM Malwood normally do the clutch master cylinder for an alright price. 1 Link to comment Share on other sites More sharing options...
nick d Donating Members 1,594 Member For: 14y 5m Gender: Male Location: Melb Posted 08/06/14 09:46 AM Share Posted 08/06/14 09:46 AM (edited) ^^^cheers for that.Still doing my head about the little spill of oil.This is a picture of the plastic eye that connects to the clutch pedal:-So after reading above will have to change master cylinder when I replace the eye?Has anyone one used this:- http://www.ebay.com.au/itm/Ford-BA-BF-Clutch-Clevis-/281355361908?pt=AU_Car_Parts_Accessories&hash=item4182161e74&_uhb=1Or should I stick to the original plastic ford eye part ? Edited 08/06/14 09:52 AM by nick d Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now