Jump to content

Recommended Posts

  • Banned
  • Banned
  • Member For: 12y 11m 8d
  • Gender: Male

Howdy guys,got a substantial leak somewhere and may have tracked it down.I have had to clean from the fuel tank to the front of motor,oil is only on passenger side.

I have cleaned her all up and found that the lower intake manifold bolts(ones to head)seem to be leaking.I had her running for 5 minutes after cleaning everywhere and after 5 minutes of shutdown some oil appears around the head of the bolt seeping through lower manifold gasket.

Could oil somehow be forced under boost into the manifold and then leak through my apparently ever so slightly leaking manifold gasket,idle is still fine.I only run a catch can on the rocker cover vent,PCV valve is as from the factory.

PS:tried to donate but wont accept Visa,is this correct?

Cheers for all responses!

Edited by GTEXXED
  • Donating Members
  • Member For: 17y 5m 10d
  • Gender: Male

just donate to my account mate haha. with the factory pcv u would not believe how much oil gets into the intake mani. and if the mani bolts are loose, could be getting through there. how much oil though - the cars runs sweet yeah ?? see if those bolts are loose.

  • Banned
  • Banned
  • Member For: 12y 11m 8d
  • Gender: Male

Ok,bit of a update.The back of the firewall is splattered with oil and the fuel rail/injectors.What ever it is must only happen under boost as its not leaking stationary in my driveway.

can a rear main make the oil go that high in the engine bay,even the base of throttle body has some splatters?

I dont think its the manifold leaking the oil but I know she is leaking air as brown air stains are around the lower manifold port holes.

having the oil get as far back as the fuel tank cover makes me concerned though,maybe the trip to mallala at highway speed pushed the leak from the front all the way back.

  • Here since the start...
  • Lifetime Members
  • Member For: 22y 2m 3d
  • Gender: Male
  • Location: Victoria

Have you had a look around the oil pressure switch area for leaks?

You really need to run it while it's on a hoist to find where it's coming from.

  • Banned
  • Banned
  • Member For: 12y 11m 8d
  • Gender: Male

Yep,all pressure switches are fine and the oil feed area is dry also.looks like a hoist job,honestly never seen oil go this far back on a car before.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'