GTEXXED Banned Banned 910 Member For: 12y 10m 14d Gender: Male Posted 19/09/12 11:38 PM Share Posted 19/09/12 11:38 PM Never had a idle stumble,get 500+ to the tank on E10 100oct and all cold/hot starts fire the same.The Dekka is also a very quick reacting injector(quicker than Bosch??) that wont hurt your pocket half as much as the others suggested.You have mentioned 350rwkw max so this injector will be perfect for your needs.I got them through my tuner Bruce Heinrich,was going to get through ebay but he said he wont back them up when/if they stuff up and it will cost me and not him to fix. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297466 Share on other sites More sharing options...
FPV6 Member 110 Member For: 12y 9m 15d Gender: Male Posted 20/09/12 12:10 AM Share Posted 20/09/12 12:10 AM What if you want room to grow are 1000cc injectors to big for a stock set up even if you plan on doing exhaust induction ect later or should you do the other things first then marry your injectors later 1 Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297483 Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,332 Member For: 19y 8m 11d Gender: Male Location: Perth Posted 20/09/12 12:17 AM Share Posted 20/09/12 12:17 AM Deka's are okay as long as you get a genuine set that's been flow tested and matched. They can be uuuuugly otherwise1000's (IE ID1000's, KPM1000's) could be used on a mechanically stock car if your tuners up to the task. Buy big enough injectors to suit your finall power goals. 2 Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297488 Share on other sites More sharing options...
FPV6 Member 110 Member For: 12y 9m 15d Gender: Male Posted 20/09/12 12:38 AM Share Posted 20/09/12 12:38 AM 2000cc here I come lol Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297497 Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 6m 13d Gender: Male Location: SE Melbourne Posted 20/09/12 02:47 AM Share Posted 20/09/12 02:47 AM Thanks guys,Is there a conversion from lbs to cc? One sounds like pressure, the other volume ?? And does anyone know what are the std ones are equal to in these measurements?Cheers,TJSUsually cc is 10x lb/ph (not exactly but close to)1000cc = 100lbor60lb = 600ccetc 2 Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297580 Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 7m 13d Gender: Male Posted 20/09/12 02:49 AM Share Posted 20/09/12 02:49 AM 2000cc here I come lolI say pretty excessive if not really going over 500rwks. 1 Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297582 Share on other sites More sharing options...
TJS Member 41 Member For: 13y 6m 26d Gender: Male Location: NSW Posted 20/09/12 05:15 AM Author Share Posted 20/09/12 05:15 AM Thanks for all your tips everyone !!Been a big help.TJS 1 Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297673 Share on other sites More sharing options...
Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 11m 1d Gender: Male Location: NOR, Western Australia Posted 20/09/12 05:57 AM Share Posted 20/09/12 05:57 AM Usually cc is 10x lb/ph (not exactly but close to)1000cc = 100lbor60lb = 600ccetcI've actually always wondered what the rough conversion was to tell the difference, cheers for that Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297699 Share on other sites More sharing options...
FPV6 Member 110 Member For: 12y 9m 15d Gender: Male Posted 20/09/12 11:09 AM Share Posted 20/09/12 11:09 AM I got quoted today $2800 for injectors and tune a bit excessive isn't it Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297868 Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 18y 3m 27d Gender: Male Location: SW Sydney Posted 20/09/12 11:17 AM Share Posted 20/09/12 11:17 AM What sort of injectors? Link to comment https://www.fordxr6turbo.com/forum/topic/81991-choosing-injectors-for-fg-f6/page/2/#findComment-1297875 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now