Jump to content

Lazys Bf2 Xr6 Turbo


LazyBrennan

Recommended Posts

  • 2 months later...
  • Donating Members
  • Member For: 13y 9m 2d
  • Gender: Male
  • Location: Baldivis, Wait Ages.

So I made 350rwkw a few years ago.

Safe to say I have been a little busy lately...

 

A friend of mine offered to sell me his xr6t with a built motor and zf gearbox done by monster torque at an amazing price. 

So me and 2 of my best mates hired 2 hoists and swapped the motors and gear box's. Both motors and box's dropped and swapped in about 12-13 hours! Solid day and they both fired up straight away!

 

The legend him self @IH8TOADS retuned my car. Previous tuner.... Lets not go there, Still dirty after the wiring of the fuel pump :finger:

Mods:

Process west stage 2 cooler with throttle body relocation 

Plazmaman 4" intake 

Full stainless xforce exhaust, 4" dump 5" cat and twin 2.5" catback 

ID1000's 

Process west surge tank with Pierburg pump 

Ported internal waste gate with 12psi actuator on stock 35/40 

 

Motor:

Atomic rods

Mahle pistons 

ARP head studs 

Billet oil pump gears 

Crow valve springs 

 

The result so far...

A193EFE3-D680-4101-9DE1-1C6A65DDC747_zps

 

So when I replaced the 044 with the pierburg I just used the existing wiring. Turns out it didn't have its own power source so it wasn't running at 100% Toads recons we can get more so we shall :P haha

But for now it feels incredible! 

Took it to the drags and had an ok night. They just scrapped the 60 foot that day so it wasn't as good as I hoped off the line but here's some pictures of the night. Missus does mint pictures!

6AC8A414-5853-4F52-B9EC-490EAE0B8D0D_zps

ECE11839-371F-40B5-B542-4F4260E3A1E3_zps

C214D83B-2AAF-4FCE-946A-1B57294E4A87_zps

5D14C8A8-3E5F-4017-A7B2-A5A3A5E663F9_zps

 

 

So we feel its still got more to give but will take time and practice. Next on the list is suspension for power cruise. Should also help me at the drags if its set up properly and start saving for a bigger turbo haha. 

 

Massive thanks to Toads for the constant help and the inspiring dick punch videos hahaha Also there's a few WA boys here who have helped a lot along the way. Luke (ralph) Aidan, Mark, Steve, Toccie. Much love. 

 

Here's some more pics of along the way. 

CBD46989-34C7-432A-B293-10526679C519_zps

B6CC2B71-CA7B-4C07-A82F-527199864A2D_zps

0AAB47AD-58ED-4E39-B2B7-60A3B27F8786_zps

7ABDA6A3-644F-4042-BF3A-75D8AD068326_zps

 

Because my level of impatience is quiet, Quiet high I ended up replacing my flex plate in my garage on the floor haha

7F1CE168-A55C-472E-907D-3F9776D01843_zps

A6ED2E61-3243-44D4-9335-34F6440533E1_zps

74C270C1-6B39-4545-BDFF-2BE7CF7499B1_zps

D991E6BC-8F20-4DFC-8DEB-2F57D63CCCC5_zps

Edited by LazyBrennan
  • Like 4
Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 29d
  • Gender: Male
  • Location: Probably above atmospheric pressure

Needs moar axle stand angle.

 

 

At least there's skids though.

Link to comment
Share on other sites

  • less WHY; more WOT
  • Site Developer
  • Member For: 16y 8m 14d
  • Gender: Male
  • Location: Melbourne

you know we could have just moved the other thread into the 400 section? :stirthepot:

 

solid update - looks fantastic and seems to go hard too; no surprises there :3gears:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'