blackxr50 Member 65 Member For: 14y 2m 14d Posted 15/09/12 07:54 AM Share Posted 15/09/12 07:54 AM hey guys I just brought a venom cat from a mate but bit confused because I don't know where to put the oxy sensor because there are 2 portshttp://imageshack.us/photo/my-images/689/dumppipe.jpg/anyone here know which one am I suppose to use Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 3m 24d Posted 15/09/12 08:02 AM Share Posted 15/09/12 08:02 AM Isn't there a pre cat sensor and post cat sensor? Maybe the venom dump doesn't have a sensor in it, they just put both on the cat. So if its your cat sensor I'd say after the cat and probably have to put a bolt in the front hole if your other sensor is in your dump pipe? Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 3m 21d Gender: Male Posted 15/09/12 08:04 AM Share Posted 15/09/12 08:04 AM You should have 2 even on stock exhaust. It's a bolt in cat so just put sensors where they are supposed to go. Just look at the stock one and do the same. You tuning the car afterwards? as a hiflow cat will make the car overboost and send car into limp mode. Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 3m 3d Gender: Male Location: left right out Posted 15/09/12 08:08 AM Share Posted 15/09/12 08:08 AM If your using the factory dump, the first sensor will be in it, second will be post cat. Just need a bung for the first port if this is the case. Link to comment Share on other sites More sharing options...
blackxr50 Member 65 Member For: 14y 2m 14d Posted 15/09/12 10:51 AM Author Share Posted 15/09/12 10:51 AM I just checked I only got one oxy sensor Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 9m 1d Gender: Male Location: Gold Coast Posted 15/09/12 11:27 AM Share Posted 15/09/12 11:27 AM If your using the factory dump, the first sensor will be in it, second will be post cat. Just need a bung for the first port if this is the case.yep, spot on. Link to comment Share on other sites More sharing options...
blackxr50 Member 65 Member For: 14y 2m 14d Posted 15/09/12 11:48 AM Author Share Posted 15/09/12 11:48 AM So the second sensor should be installed after the cat correct Link to comment Share on other sites More sharing options...
blackxr50 Member 65 Member For: 14y 2m 14d Posted 15/09/12 11:57 AM Author Share Posted 15/09/12 11:57 AM Also when I install it am I able to drive because I gotta take it to my tuner Link to comment Share on other sites More sharing options...
hawlass Silver Donating Members 1,161 Member For: 17y 3m 3d Gender: Male Location: left right out Posted 15/09/12 08:15 PM Share Posted 15/09/12 08:15 PM "I just checked I only got one oxy sensor" - do you mean after the cat I assume?, you should be able to see the wires and top of the first oxy sensor in the dump pipe, under the heatshield, near the fire wall .If its just the cat changed, yes fine to drive straight to your tuners, just keep it off boost, 2000rpm max and you will be sweet.Really only injectors changed you never want to drive with- best done at the tuners that one. Link to comment Share on other sites More sharing options...
blackxr50 Member 65 Member For: 14y 2m 14d Posted 16/09/12 02:50 AM Author Share Posted 16/09/12 02:50 AM I could only see the I before the cat Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now